2011 - 2015
2015
15/24 Prof. Thierry Maitre (LEGI Grenoble)
10 years of Darrieus turbine development at LEGI Lab
15/23 M.Sc. Laszlo Daroczy (LSS)
Optimization of a amall-scale H-rotor
15/22 M.Sc. Nils Lichtenberg (LSS)
Mehrphasenströmungen in der Gießtechnik
15/21 M.Sc. Anurag Misra (LSS)
Moment-based simulation of a crystallizer
15/20 M.Sc. Lisa-Maria Wagner (LSS)
Experimental characterization of a multiphase reactor
15/19 M.Sc. Cheng Chi (LSS)
Direct Numerical Simulation of turbulent flames
15/18 M.Sc. Luis Medeiros (LSS)
Numerical simulation and optimization of crystallizers
15/17 M.Sc. Kristin Kerst (LSS)
Open-Source CFD-DEM-Simulation eines Kristallisators
15/16 M.Sc. Jan Meyer (LSS)
Auslegung einer Pitot-Pumpe für die Trennförderung
15/15 M.Sc. Amir Eshghinejadfard (LSS)
Lattice-Boltzmann simulation of particulate flows
15/14 Dr.-Ing. Leonid Goubergrits (Labor für Biofluidmechanik, Charité)
MRI-basierte CFD zur Unterstützung klinischer Diagnose und Therapieplanung angeborener Herzfehler
15/13 Dr. Abdus Samad (LSS)
Research activities at IIT Madras and at the Department of Ocean Engineerings
15/12 M.Sc. Stefan Hoerner (LSS)
Energy generation with hydraulic Darrieus turbines
15/11 M.Sc.Olivier Cleynen (LSS)
Energy generation with modern water wheels
15/10 M.Sc. Michael Mansour (LSS)
Two-phase flow in a centrifugal pump
15/09 M.Sc. Peter Kováts (LSS)
Experimental study of mass transfer in bubble columns
15/08 Dipl.-Ing. Christoph Roloff (LSS)
Experimental study of a zig-zag air classifier
15/07 M.Sc. Timo Oster (LSS)
On-the-fly postprocessing of direct numerical simulations
15/06 Dr.-Ing. Christiane Zistl
File-based post processing of DNS results for turbulent flames using MATLAB
15/05 M.Sc. Samuel Voß (LSS)
Fluid-structure simulations in cerebral aneurysms
15/04 M.Sc. Sebastian Engel (LSS)
Tesla pumps for blood flows considering hemolysis
15/03 Priv.-Doz. Gábor Janiga (LSS)
What can be done with Proper Orthogonal Decomposition
15/02 Prof. Friedrich Dinkelacker (ITV, Universität Hannover)
Detailed experimental combustion
15/01 M.Sc. Toni Eger (LSS)
Strömungssimulation des Wärmetransportes mit Entropie
2014
14/28 M.Sc. Anurag Misra (LSS)
Moment-based simulation of a crystallizer
14/27 M.Sc. Luis Medeiros (LSS)
Numerical simulation and optimization of crystallizers
14/26 M.Sc. Kristin Kerst (LSS)
Open-Source CFD-DEM-Simulation eines Kristallisators
14/25 M.Sc. László Daróczy (LSS)
Optimization of a Darrieus Turbine
14/24 M.Sc. Lisa-Maria Wagner (LSS)
Messung des Stofftransports in einer Blasensäule
14/23 M. Sc. Ahmed Bekhti (Centre de Développement des Energies Renouvelables, Algier)
Computation of Fluid-Structure Interaction (FSI) in wind turbines at CDER
14/22 Professoren Liia Makarova, Alexander Erzikov, Anatoly Yakovlev (KNRTU, Kazan)
Research Activities at the Kazan National Research Technical University
14/21 M.Sc. Abouelmagd Abdelsamie (LSS)
Direct Numerical Simulation of particulate/reacting flow
14/20 M.Sc. Amir Eshghinejadfard (LSS)
Lattice-Boltzmann simulation of particulate flows
14/19 Dipl.-Ing. Philipp Berg (LSS)
Hämodynamik & Behandlung intrakranieller Aneurysmen
14/18 Dipl.-Ing. Jan Meyer (LSS)
Simulation und Optimierung einer Pitot-Pumpe
14/17 M.Sc. Hai Yu (LSS)
Computation and optimization of a blood pump
14/16 M.Eng. Nils Lichtenberg (LSS)
Mehrphasenströmungen in der Gießtechnik
14/15 Dipl.-Ing. Christoph Roloff (LSS)
Particle Tracking Velocimetry for biomedical applications
14/14 M.Sc. Timo Oster (LSS&ISG)
On-the-fly postprocessing of direct numerical simulations
14/13 Dipl.-Ing. Christiane Zistl (LSS)
Datenbasiertes Postprocessing von DNS-Ergebnissen
14/12 M.Sc. Bernhard Linseisen (LSS)
Safety-relevant flow simulation of helium spill
14/11 Prof. Dr.-Ing. Ulrich Krause (IAUT)
CFD-Anwendungen für Anlagensicherheit und Brandschutz
14/10 M.Sc. Kiryl Pliavaka (LSS)
Plasma-assisted flames measured with Raman and OH LIF
14/09 M.Sc. Péter Kováts (LSS)
Two-color LIF for the characterization of bubble columns
14/08 Dipl.-Ing. Thomas Neupert (IMK)
Zweiphasenströmungssimulation in Kupplungslamellen
14/07 Dipl.-Ing. Pavlo Lyubarskyy (IMK)
Simulation der Strömung in einer Kolben/Zylinder-Paarung
14/06 Dipl.-Ing. Philipp Berg (LSS)
Hämodynamik und Behandlung intrakranieller Aneurysmen
14/05 M.Eng. Nils Lichtenberg (LSS)
Mehrphasenströmungen in der Gießtechnik
14/04 Dipl.-Ing. Lászlo Daróczy (LSS)
Computation and optimization of a Darrieus turbine
14/03 Dipl.-Ing. Martin Theile (LSS/Univ. Rostock)
Cold flow simulation of an ICE using SAS turbulence model
14/02 M.Sc. Luis Medeiros (LSS)
Numerical simulation and optimization of crystallizers
14/01 M.Sc. Kristin Kerst (LSS)
Open-Source CFD-DEM-Simulationen
2013
13/17 Dipl.-Ing. Jan Meyer (LSS)
Berechnung und Optimierung einer Pitot-Pumpe
13/16 M.Sc. Hai Yu (LSS)
Hemolysis and optimization of blood pumps
13/15 Dr.-Ing. Gordon Fru (LSS)
DINOSOARS: a new generation tool for Direct Simulation
13/14 M.Sc. Abouelmagd Abdelsamie (LSS)
Direct Numerical Simulation of two-phase flows
13/13 M.Sc. Amir Eshghinejad (LSS)
Flow simulations using a Lattice-Boltzmann model
13/12 M.Sc. Bernhard Linseisen (LSS)
Coupled multi-scale CFD simulations
13/11 Dr. Thomas von Larcher (FU Berlin)
Baroclinic flows in a thermally driven rotating annulus
13/10 M.Sc. Timo Oster (LSS)
Efficient postprocessing for direct numerical simulations
13/09 M.Sc. Kiryl Pliavaka (LSS)
Combustion supported by a warm plasma discharge
13/08 Prof. Christoph Egbers (BTU Cottbus)
Physics of rotating fluids: Geophysical and technical applications
13/07 Dipl.-Ing. Christoph Roloff (LSS)
Particle Tracking Velocimetry for biomedical applications
13/06 Dipl.-Ing. Jan Meyer (LSS)
Trennförderung von flüssig-flüssig-Gemischen
13/05 M.Sc. L. Medeiros (LSS)
Numerical optimization of multiphase reactors
13/04 Dipl.-Ing. C. Zistl (LSS)
Analyse und Modellierung turbulenter Flammen
13/03 Dr.-Ing. R. Bordás (LSS)
Turbulence intensification with active grids
13/02 M.Eng. N. Lichtenberg (LSS)
Untersuchung von Mehrphasenströmungen in der Gießtechnik
13/01 M.Sc. T. Oster (LSS)
Detailed analysis of complex flow data sets
2012
12/25 Dipl.-Ing. P. Berg (LSS)
Validierung der Hämodynamik in intrakraniellen Aneurysmen
12/24 Dipl.-Ing. L. Daróczy (LSS)
Efficient optimization techniques for flow simulations
12/23 M.Sc. H. Yu (LSS)
Hemolysis and optimization of blood pumps
12/22 M.Sc. Abouelmagd Abdelsamie (LSS)
Direct Numerical Simulation of two-phase flows
12/21 Dr.-Ing. Thiru Chittipotula (LSS)
Modeling of bubble columns: present state of the art
12/20 Prof. Dr.-Ing. B. Futterer (LSS, Dorothea-Erxleben-Professur)
Flow control within thermo-electro-hydrodynamic convection
12/19 Dr. Alan Kerstein (Consultant, ehem. SANDIA)
Formulation and application of a sparse-modes method for turbulence simulation
12/18 Prof. S. Sarkar (IIT Kanpur)
Large-Eddy Simulation for Flows of Engineering Interest
12/17 Dipl.-Ing. Jan Meyer (LSS)
Trennförderung von flüssig-flüssig-Gemischen
12/16 M.Sc. Bernhard Linseisen (CERN & LSS)
Coupled multi-scale CFD simulations
12/15 M.Sc. Kiryl Pliavaka (LSS)
Combustion supported by a warm plasma discharge
12/14 Prof. Michael Schlüter (T.U. Hamburg-Harburg)
Mass Transfer in Reactive Bubbly Flows
12/13 Dr.-Ing. Robert Bordás (LSS)
Collision probabilities in turbulent sprays
12/12 Dipl.-Ing. Thomas Hagemeier (LSS)
Experimentelle Untersuchung von Flüssigkeitsfilmen
12/11 Dr.-Ing. Nico Krause (Sulzer Pumpen)
Pumpen und Hilfssysteme in der Öl- und Gasindustrie
12/10 Prof. Tarek Echekki (North Carolina State Univ.)
Turbulent Combustion Modeling and Simulation with the One-Dimensional Turbulence (ODT) Model
12/09 Dipl.-Ing. Tamás Bányai (VKI, Brussels)
Incompressible Large Eddy Simulation by means of Stabilized Finite Element/Residual Distribution method
12/08 Dr.-Ing. Gordon Fru (LSS)
Ignition probability in turbulent gas mixtures
12/07 B.Sc. Patricia Arányi (LSS)
POD analysis and vortical structures in a fan impeller
12/06 Prof. Kai Luo (Univ. of Southampton)
Direct Numerical Simulations of turbulent flames
12/05 Dipl.-Ing. Daniel Stucht (IEP/FNW)
MRT/MRI in der Strömungsmechanik
12/04 Dr.-Ing. Ashraf Ali (LSS and MPI Magdeburg)
Coupled DEM/CFD simulations of crystallizers
12/03 M.Sc. Bernhard Linseisen (CERN und LSS)
Multi-scale simulations of confined flows
12/02 M.Sc. Christian Rauchegger (BAM und LSS)
Untersuchungen zur Schwergasausbreitung
12/01 M.Sc. Nils Lichtenberg (LSS)
Wassermodelle zur Untersuchung von Dreiphasenströmungen
2011
11/26 Dr.-Ing. Robert Bordás (LSS)
Optical measurements in disperse two-phase .flows: application to rain formation in cumulus clouds
11/25 M.Sc. Hai Yu (LSS)
Hemolysis and optimization of blood pumps
11/24 Dipl.-Ing. Philipp Berg (LSS)
Virtual intracranial stenting using CFD
11/23 Prof. Holger Theisel (ISG)
Visuelle Analyse komplexer Strömungen
11/22 M.Sc. Santhosh Seshadhri (LSS)
Hemodynamics and virtual stenting of cerebral aneurysms
11/21 Dipl.-Ing. Christoph Roloff (LSS)
Particle Tracking Velocimetry (PTV) with fluorescent tracers
11/20 M.Sc. Thiru Chittipotula (LSS)
Production of TiO2 nanoparticles in flame reactors
11/19 M.Sc. Luis Medeiros (LSS)
Optimization of kinetic parameters and reaction mechanisms
11/18 Dr.-Ing. Gábor Janiga (LSS)
Stand und Perspektiven der Turbulenzmodellierung
11/17 M.Sc. Hai Yu (LSS)
Simulation of red blood cell damage in pumps
11/16 M.Sc. Paola Ranut (Univ. Trieste/LSS)
Coupled optimization of flows with heat exchange
11/15 Dipl.-Ing. Christoph Roloff (LSS)
Scherbeanspruchung und Tracking/PTV von Zellen
11/14 M.Sc. Bernhard Linseisen (CERN/LSS)
Coupled multi-scale CFD simulations
11/13 Dipl.-Ing. Andreas Lucius (T.U. Clausthal und LSS)
Analyse wirbelbehafteter Geschwindigkeitsfelder in Turbomaschinen
11/12 Dipl.-Ing. Andreas Lehwald (LSS)
Hochgeschwindigkeits-PIV in einem Industrieventilator
11/11 M.Sc. Luis Medeiros (LSS)
Model optimization for turbulent reacting flows
11/10 M.Sc. Thiru Chittipotula (LSS)
Nanoparticle generation in flames
11/09 Dipl.-Ing. Philipp Berg (LSS)
Instationäre Blutströmungen in zerebralen Aneurysmen
11/08 Dr.-Ing. Mohamed Mohamed (LSS)
Design optimization of Savonius and Wells turbines
11/07 Prof. Marc Massot (EM2C/Ecole Centrale Paris)
Eulerian high order moment methods for evaporating sprays: from mathematical issues to HPC
11/06 Dr.-Ing. Max Duarte (EM2C/Ecole Centrale Paris)
Adaptive time-space algorithms for the simulation of multi-scale reaction waves
11/05 Dipl.-Ing. Marten Quast (LSS)
Numerical modeling of cerebral blood flows using fluid-structure coupling
11/04 Dipl-Ing. Thomas Hagemeier (LSS)
Liquid film modeling including wetting and break-up
11/03 M.Sc. Christian Rauchegger (BAM/LSS)
Experimentelle Untersuchungen zur Schwergasausbreitung
11/02 M.Sc. Gordon Fru (LSS)
Analysis of combustion DNS at high Reynolds numbers
11/01 M.Sc. Mohamed Mohamed (LSS)
Design and performance optimization of a Savonius turbine