Otto-von-Guericke-Universität Magdeburg

 
 
 
 
 
 
 
 

Publikationen (Stand September 2017)

Note:

Full text of all Ph.D. Theses available by clicking on the correspondig link

List includes only accepted publications, submissions not listed   

Patents not included                                                                                                                         

2016   2015   2014   2013   2012    2011    2010    2009    2008    2007    2006    2005    2004    2003

2017

Journal articles

Abdelsamie, A. and Thévenin, D., Direct Numerical Simulation of spray evaporation and autoignition in a temporally-evolving jet. Proc. Combust. Inst. 36, (2017) 2493-2502.

Abdelsamie, A., Lignell, D.O. and Thévenin, D., Comparison between ODT and DNS for ignition occurrence in turbulent premixed jet combustion: Safety-relevant applications. Z. Phys. Chem. DOI 10.1515/zpch-2016-0902, (2017) 1-27.

Abdelsamie, A., Janiga, G. and Thévenin, D., Spectral entropy as a flow state indicator. Int. J. Heat Fluid Flow 68, (2017) 102-113.

Berg, P. and O. Beuing (2017). Multiple intracranial aneurysms: a direct hemodynamic comparison between ruptured and unruptured vessel malformations. Int. J. Comp. Assist. Radiol. Surg., DOI 10.1007/s11548-017-1643-0, pp. 1-11.

Berg, P., S. Saalfeld, S. Voß, T. Redel, B. Preim, G. Janiga and O. Beuing (2017). Does the DSA reconstruction kernel affect hemodynamic predictions in intracranial aneurysms? An analysis of geometry and blood flow variations. J. Neurointervent. Surg. in press: doi:10.1136/neurintsurg-2017-012996.

Chi, C., Janiga, G., Abdelsamie, A., Zähringer, K., Turányi, T. and Thévenin, D., DNS study of the optimal chemical markers for heat release in syngas flames. Flow Turbul. Combust. 98(4), (2017) DOI 10.1007/s10494-016-9799-1, 1117-1132.

Chi, C., Janiga, G., Zähringer, K. and Thévenin, D., Indirect measurement of heat release in hydrogen flames using species correlations. VDI Ber. 2302, (2017) 625-636.

Chi, C., Abdelsamie, A. and Thévenin, D., Direct numerical simulations of hotspot-induced ignition in homogeneous hydrogen-air pre-mixtures and ignition spot tracking. Flow Turbul. Combust., (2017) accepted for publication

Cleynen, O., S. Hoerner and D. Thévenin (2017). Characterization of hydraulic power in free-stream installations. Int. J. Rotating Mach. 2017:9806278/1-10.

Eger, T., T. Bol, A. R. Thanu, L. Daróczy, G. Janiga, R. Schroth and D. Thévenin (2017). Application of entropy generation to improve heat transfer of heat sinks in electric machines. Entropy 19(255):1-15, DOI 10.3390/e19060255.

Eshghinejadfard, A., A. Abdelsamie, S. A. Hosseini and D. Thévenin (2017). Immersed boundary lattice Boltzmann simulation of turbulent channel flows in the presence of spherical particles. Int. J. Multiphase Flow, accepted for publication.

Eshghinejadfard, A., K. Sharma and D. Thévenin (2017). Effect of polymer and fiber additives on pressure drop in a rectangular channel. J. Hydrodyn. accepted for publication.

Eshghinejadfard, A., Hosseini, S.A. and Thévenin, D., Fully-resolved prolate spheroids in turbulent channel flows: A lattice Boltzmann study. AIP Adv., accepted for publication, (2017).

Gauding, M., F. Dietzsch, J. H. Goebbert, D. Thévenin, A. Abdelsamie and C. Hasse (2017). Dissipation element analysis of a turbulent non-premixed jet flame. Phys. Fluids 29(doi: 10.1063/1.4991574), (2017) 085103.

Halder, P., Samad, A. and Thévenin, D., Improved design of a Wells turbine for higher operating range. Renew. Energ. 106, (2017) 122-134.

Hlawitschka, M.W., Kováts, P., Zähringer, K. and Bart, H.J., Simulation and experimental validation of reactive bubble column reactors. Chem. Eng. Sci. 170, (2017) 306-319.

Hosseini, S.A., Eshghinejadfard, A., Darabiha, N. and Thévenin, D., Weakly compressible Lattice Boltzmann simulations of reacting flows with detailed thermo-chemical models. Comput. Math. Appl., accepted for publication, (2017).

Hosseini, S.A., Eshghinejadfard, A., Darabiha, N. and Thévenin, D., Stability limits of the single-relaxation-time advection-diffusion lattice Boltzmann scheme. International Journal of Modern Physics C, accepted for publication, (2017).

Iosif, C., Berg, P., Ponsonnard, S., Carles, P., Saleme, S., Ponomarjova, S., Pedrolo-Silveira, E., Mendes, G., Waihrich, E., Trolliard, G., Couquet, C.Y., Yardin, C., and Mounayer, C., Role of terminal and anastomotic circulation in the patency of arteries jailed by flow-diverting stents: from hemodynamic changes to ostia surface modifications. J. Neurosurg. 126, (2017) 1702-1713.

Janiga, G., D. Stucht, R. Bordás, E. Temmel, A. Seidel-Morgenstern, D. Thévenin and O. Speck (2017). Noninvasive 4D flow characterization in a stirred tank via phase-contrast magnetic resonance imaging. Chem. Eng. Tech. 40 (7): 1370-1377.

Jokiel, M., Wagner, L.-M., Mansour, M., Kaiser, N.M., Zähringer, K., Janiga, G., Nigam, K.D.P., Thévenin, D. and Sundmacher, K., Measurement and simulation of mass transfer and backmixing in a two-phase helically coiled tube reactor. Chem. Eng. Sci. 170, (2017) 410-421.

Kerst, K., C. Roloff, L. Medeiros de Souza, A. Bartz, A. Seidel-Morgenstern, D. Thévenin and G. Janiga (2017). CFD-DEM simulations of a fluidized bed crystallizerChem. Eng. Sci. 165:1-13.

Kováts, P., D. Thévenin and K. Zähringer (2017). Investigation of mass transfer and hydrodynamics in a model bubble column. Chem. Eng. Technol. 40(8), (2017) 1434-1444.

Kováts, P., Thévenin, D. and Zähringer, K., Characterizing fluid dynamics in a bubble column aimed for the determination of reactive mass transferHeat Mass Transf. (2017), accepted for publication, DOI 10.1007/s00231-017-2142-0.

Mann, H., C. Roloff, T. Hagemeier, D. Thévenin and J. Tomas (2017). Model-based experimental data evaluation of separation efficiency of multistage coarse particle classification in a zigzag apparatus. Powder Tech. 313: 145-160.

Mansour, M., Z. Liu, G. Janiga, K. D. P. Nigam, K. Sundmacher, D. Thévenin and K. Zähringer (2017). Numerical study of liquid-liquid mixing in helical pipes. Chem. Eng. Sci. 172:250-261.

Manthey, S., S. Voß, C. Roloff, D. Stucht, D. Thévenin, G. Janiga and P. Berg (2017). Comparison of pressure reconstruction approaches based on measured and simulated velocity fields. Cur. Dir. Biomed. Eng. 3(2), (2017) 309-312.

Medeiros de Souza, L., G. Janiga and D. Thévenin (2017). Multi-objective optimisation of the model parameters for the realizable k − ε turbulence model. Prog. CFD 17(2): 90-101.

Meuschke, M., Voß, S., Beuing, O., Preim, B. and Lawonn, K., Combined visualization of vessel deformation and hemodynamics in cerebral aneurysms. IEEE Trans. Vis. Comput. Graph. 23(1), (2017) 761-770.

Meyer, J., Daróczy, L. and Thévenin, D., Shape optimization of the pick-up tube in a Pitot-tube jet-pump. J. Fluids Eng. 139, (2017) 021103/1-11.

Misra, A., L. Medeiros de Souza, M. Illner, L. Hohl, M. Kraume, J.-U. Repke and D. Thévenin (2017). Simulating separation of a multiphase liquid-liquid system in a horizontal settler by CFD. Chem. Eng. Sci. 167: 242-250.

Ranga Dinesh, K. K. J., H. Shalaby, K. H. Luo, J. A. van Oijen and D. Thévenin (2017). Heat release rate variations in high hydrogen content premixed syngas flames at elevated pressures: Effect of equivalence ratio. Int. J. Hydrogen Energ. 42:7029-7044.

Rzehak, R., Krauß, M., Kováts, P. and Zähringer, K., Fluid dynamics in a bubble column: New experiments and simulations. Int. J. Multiphase Flow 89, (2017) 299-312.

Saalfeld, P., Luz, M., Berg, P., Preim, B. and Saalfeld, S., Guidelines for quantitative evaluation of medical visualizations on the example of 3D aneurysm surface comparisons. Comput. Graph. Forum, in press,  (DOI: 10.1111/cgf.13262), (2017) 1-14.

Schießl, R., Bykov, V., Maas, U., Abdelsamie, A. and Thévenin, D., Implementing multi-directional molecular diffusion terms into Reaction Diffusion Manifolds (REDIMs). Proc. Combust. Inst. 36, (2017) 673-679.

Voß, S., P. Berg, G. Janiga, M. Skalej and O. Beuing (2017). Variability of intra-aneurysmal hemodynamics caused by stent-induced vessel deformation. Cur. Dir. Biomed. Eng. 3(2), (2017) 305-308.

Yu, H., Engel, S., Janiga, G. and Thévenin, D., A review of hemolysis prediction models for Computational Fluid Dynamics. Art. Organs 41(7), (2017) 603-621

Zähringer, K., L.-M. Wagner, D. Thévenin, P. Siegmund and K. Sundmacher (2017). Particle-Image-Velocimetry measurements in organic liquid multiphase systems for an optimal reactor design and operation. J. Vis., DOI 10.1007/s12650-017-0435-5, 1-13.

Proceedings and Conferences

Abdelsamie, A., Janiga, G., Chi, C. and Thévenin, D., Turbulence structure analysis of DNS data using DMD and SPOD: mixing jet and channel flow, in Progress in Turbulence VII, (Örlü R., Talamelli A., Oberlack M., Peinke J., Eds.), Springer Proceedings in Physics, vol. 196, Springer, 199-204 (2017).

Abdelsamie, A. and Thévenin, D., On the behavior of scalar dissipation rate in turbulent spray combustion using DNS, in Direct and Large-Eddy Simulation XI, Pisa, Italy (2017).

Berg, P., Daróczy, L. and Janiga, G., Virtual stenting for intracranial aneurysms: a risk-free, patient-specific treatment planning support for neuroradiologists and neurosurgeons, in Computing and visualization for intravascular imaging and computer-assisted stenting, (Balocco, S., Zuluaga, M.A., Zahnd, G., Lee S.-L. and Demirci, S., Eds), Elsevier, Academic Press, ISBN 9780128110188, 371-411 (2017).

Behrendt, B., Berg, P., Preim, B. and Saalfeld, S.: Combining pseudo chroma depth enhancement and parameter mapping for vascular surface models. In: 7th Eurographics Workshop on Visual Computing for Biology and Medicine (VCBM), (S. Bruckner, A. Hennemuth and B. Kainz, Eds.), 1-10, 2017.

Chi, C., Abdelsamie, A., Oster, T. and Thévenin, D.: Probability of hotspot ignition and ignition spot tracking in turbulent hydrogen-air mixtures using Direct Numerical Simulations In: 8th European Combustion Meeting (ECM 2017), Dubrovnik, Croatia, ISBN 978-953-59504-1-7, 925-930, 2017.

Cleynen, O., Kerikous, E., Hoerner, S. and Thévenin, D.: Influence of flotation bodies on the power characteristics of a free-stream water wheel. In: 9th International Conference on Computational & Experimental Methods in Multiphase & Complex Flow, Tallinn, Estonia, June 20-22, 2017.

Daróczy, L., Abdelsamie, A., Janiga, G. and Thévenin, D.: State detection and hybrid simulation of biomedical flows. In: 10th International Symposium on Turbulence and Shear Flow Phenomena, Chicago, IL, 280/1-6, 2017.

Hellmann, R., Jochmann, P., Stapf, K.G., Schuenemann, R., Daróczy, L. and Thévenin, D.: Towards design optimization of high-pressure gasoline injectors using Genetic Algorithm coupled with Computational Fluid Dynamics (CFD). In: ILASS2017, 28th Conference on Liquid Atomization and Spray Systems, Valencia, Spain, accepted for presentation, 2017.

Hoerner, S., Bonamy, C., Maître, T., Cleynen, O. and Thévenin, D.: Strongly-coupled fluid-structure-interation with large deformations on a flexible hydrofoil under forced oscillation. In: 12th OpenFOAM Workshop, Exeter, UK, 2017.

Hosseini, S.A., Eshghinejadfard, A., Darabiha, N. and Thévenin, D.: Mass-conserving advection-diffusion Lattice Boltzmann model for multi-species flows. In: 26th International Conference on Discrete Simulation of Fluid Dynamics (DSFD), Erlangen, Germany, 2017.

Hosseini, S.A., Eshghinejadfard, A., Darabiha, N. and Thévenin, D.: ALBORZ-REGATH: An efficient Lattice Boltzmann solver for reacting flows with multi-component transport and detailed chemistry. In: 8th European Combustion Meeting (ECM 2017), Dubrovnik, Croatia, ISBN 978-953-59504-1-7, 752-757, 2017.

Jokiel, M., Mansour, M., Zähringer, K., Janiga, G., Nigam, K.D.P., Thévenin, D. and Sundmacher, K., Helix reactor for gas-liquid-reactions: Characterization of mass transfer and axial dispersion, in DECHEMA Jahrestreffen Reaktionstechnik 2017, Würzburg (2017).

Kerst, C., Roloff, C., Medeiros de Souza, L., Bartz, A., Temmel, E., Thévenin, D., Seidel-Morgenstern, A. and Janiga, G.: Validierung von CFD-DEM-Simulationen eines Einzelkristallisators. In: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmungen, Dresden, Germany, 18, 2017.

Kováts, P., Thévenin, D. and Zähringer, K.: Optical measurement of oxygen mass transfer in a coiled reactor. In: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmungen, Dresden, Germany, 44-45, 2017.

Medeiros de Souza, L., Misra, A., Hohl, L., Janiga, G., Kraume, M. and Thévenin, D.: Simulating phase separation in a micellar three-phase system using CFD: coalescence modelling and application to a horizontal settler. In: 10th World Congress of Chemical Engineering WCCE10, Barcelona, Spain, accepted for presentation, 2017.

Müller, S., Cleynen, O. and Thévenin, D.: Numerical investigation of the influence of a guide wall in a fish-friendly weir. In: International Conference on Engineering and Ecohydrology for Fish Passage, Corvallis, Oregon, June 19-21, 2017.

Ranga Dinesh, K.K.J., Shalaby, H., Luo, K.H. and Thévenin, D.: The development of flame instabilities in lean premixed syngas flames under low turbulence level at elevated pressure. In: 8th European Combustion Meeting (ECM 2017), Dubrovnik, Croatia, ISBN 978-953-59504-1-7, 2199-2204, 2017.

Roloff, C., Berg, P., Redel, T., Janiga, G. and Thévenin, D.: Tomographic Particle Image Velocimetry for the validation of hemodynamic simulations in an intracranial aneurysm. In: 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC’17), Jeju Island, South Korea, accepted for presentation, 2017.

Theses

Abdelsamie, A., Direct Numerical Simulations of turbulent flow and spray combustion, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

Birjay, K., Conditioning plant for a twin circuit cooling system, Master's Thesis LSS-M06/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

Eger, T. Zur Analyse und Bewertung der Wärmeübertragung am Beispiel von elektrischen Generatoren, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

George, N.K., Simulation of a crystallizer reactor using quadrature-based method of moments (QMOM), Master's Thesis LSS-M04/17, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

Müller, S., Numerical Investigation of the flow in a vortex power plant in consideration of the river continuity, Master's Thesis LSS-M015/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

Rustem, A., Improving the velocity determination at a hard-to-reach location in the Tundish water model via LDA measurements, Master's Thesis LSS-M11/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

Skrypnik, A., Numerical simulation of energy transfers in a helically-corrugated pipe heat exchanger, Master's Thesis LSS-M12/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

Steinmüller, R., Experimentelle Messungen an einer adaptieren Pitot-Pumpe zur Trennung von Öl-Wasser-Gemischen, Master's Thesis LSS-M09/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2017).

2016

Journal articles

Abdelsamie, A., Fru, G., Oster, T., Dietzsch, F., Janiga, G. and Thévenin, D., Towards Direct Numerical Simulations of low-Mach number turbulent reacting and two-phase flows using Immersed Boundaries. Comput. Fluids 131, (2016) 123-141.

Berg, P., Iosif, C., Ponsonnard, S., Yardin, C., Janiga, G. and Mounayer, C., Endothelialization of under- and oversized flow-diverter stents at covered vessel side branches: An in vivo and in silico study. J. Biomech. 49, (2016) 4-12.

Daróczy, L., Janiga, G. and Thévenin, D., Analysis of the performance of a H-Darrieus rotor under uncertainty using Polynomial Chaos Expansion. Energy 113, (2016) 399-412.

Dunker, C., Roloff, C. and Grassmann, A., Interferometric laser imaging for in-flight cloud droplet sizing. Meas. Sci. Technol. 27, (2016) 124004/1-10.

Eger, T., Bol, T., Daróczy, L., Janiga, G., Schroth, R. and Thévenin, D., Numerical investigations of entropy generation to analyze and improve heat transfer processes in electric machines. Int. J. Heat Mass Trans. 102, (2016) 1199-1208.

Eshghinejadfard, A., Abdelsamie, A., Janiga, G. and Thévenin, D., Direct-forcing immersed boundary lattice Boltzmann simulation of particle/fluid interactions for spherical and non-spherical particles. Particuol. 25, (2016) 93-103.

Eshghinejadfard, A., Daróczy, L., Janiga, G. and Thévenin, D., Calculation of the permeability in porous media using the Lattice Boltzmann method. Int. J. Heat Fluid Flow, (2016) 1-11.

Eshghinejadfard, A. and Thévenin, D., Numerical simulation of heat transfer in particulate flows using a thermal immersed boundary lattice Boltzmann method. Int. J. Heat Fluid Flow 60, (2016) 31-46.

Glaßer, S., Berg, P., Voß, S., Serowy, S., Janiga, G., Preim, B. and Beuing, O., From imaging to hemodynamics - How reconstruction kernels influence the blood flow predictions in intracranial aneurysms. Cur. Dir. Biomed. Eng. 10, (2016) 1-4.

Glaßer, S., Hoffmann, T., Boese, A., Voß, S., Kalinski, T., Skalej, M. and Preim, B., Virtual inflation of the cerebral artery wall for the integrated exploration of OCT and histology data. Comput. Graph. Forum, (2016) in press, DOI: 10.1111/cgf.12994.

Iosif, C., Berg, P., Ponsonnard, S., Carles, P., Saleme, S., Ponomarjova, S., Pedrolo-Silveira, E., Mendes, G., Waihrich, E., Trolliard, G., Couquet, C.Y., Yardin, C., and Mounayer, C., Role of terminal and anastomotic circulation in the patency of arteries jailed by flow-diverting stents: animal flow model evaluation and preliminary results. J. Neurosurg. 125(4), (2016) 898-908.

Oeltze-Jafra, S., J. Cebral, G. Janiga and B. Preim (2016). Cluster analysis of vortical flow in simulations of cerebral aneurysm hemodynamics. IEEE Trans. Vis. Comput. Graph. 22(1): 757-766.

Ranga Dinesh, K.K.J., Shalaby, H., Luo, K.H., van Oijen, J.A. and Thévenin, D., High hydrogen content Syngas fuel burning in lean premixed spherical flames at elevated pressures: Effects of preferential diffusion Int. J. Hydrogen Energ. 41, (2016) 18231-18249.

Ranga Dinesh, K.K.J., Shalaby, H., Luo, K.H., van Oijen, J.A. and Thévenin, D., Effects of pressure on cellular flame structure of high hydrogen content lean premixed Syngas spherical flames: A DNS study. Int. J. Hydrogen Energ. 41, (2016) 21516-21531.

Theile, M., Hassel, E., Thévenin, D., Buchholz, B., Michels, K. and Hofer, M., Analysis of cycle-to-cycle variations of the mixing process in a direct injection spark ignition engine using scale-resolving simulations. SAE Int. J. Engines 9(4), (2016) 1-17, doi:10.4271/2016-01-9048.

Voß, S., Glaßer, S., Hoffmann, T., Beuing, O., Weigand, S., Jachau, K., Preim, B., Thévenin, D., Janiga, G. and Berg, P., Fluid-structure simulations of a ruptured intracranial aneurysm: Constant versus patient-specific wall thickness. Comput. Math. Meth. Med. 2016(ID 9854539), (2016) 1-8.

Yu, H., G. Janiga and D. Thévenin (2016). Computational Fluid Dynamics-based design optimization method for Archimedes screw blood pumps. Art. Organs 40(4): 341-352.

Proceedings and Conferences

Berg, P., Voß, S., Becker, M., Serowy, S., Redel, T., Janiga, G., Skalej, M. and Beuing, O.: Bringing hemodynamic simulations closer to the clinics: A CFD prototype study for intracranial aneurysms. In: IEEE Engineering in Medicine and Biology Society (EMBC’16), Orlando, USA, ISBN 978-1-4577-0220-4/16, 3302-3305, 2016.

Berg, P., Voß, S., Glaßer, S., Hoffmann, T., Weigand, S. and Janiga, G.: Fluid-structure interaction of a ruptured intracranial aneurysm: Does patient-specific wall thickness matter? In: Summer Biomechanics, Bioengineering and Biotransport Conference SB3C, National Harbor, USA, 35, 2016.

Chi, C., Janiga, G., Abdelsamie, A., Zähringer, K., Turányi, T. and Thévenin, D.: DNS study of the optimal chemical markers for heat release in syngas flames. Poster, 36th International Symposium on Combustion, Seoul, Korea, Poster, The Combustion Institute, 2016.

Cleynen, O., Hoerner, S. and Thévenin, D., Performance mapping of ducted free-stream hydropower devices, in Sustainable Hydraulics in the Era of Global Change, (Erpicum et al., Eds.), Taylor & Francis Group, London, ISBN 978-1-138-02977-4, 284-289 (2016).

Daróczy, L., Berg, P. and Janiga, G.: Treatment improvement for intracranial aneurysms: Stent individualization using Computational Fluid Dynamics coupled with optimization techniques. In: MICCAI-Workshop on Computing and Visualization for Intravascular Imaging and Computer Assisted Stenting (CVII-STENT), Athens, 1-8, 2016.

Daróczy, L., Berg, P. and Janiga, G.: Optimization of flow diverter treatment for a patient-specific giant aneurysm using STAR-CCM+. In: Star Global Conference, Prague, Czech Republic, 2016.

Engel, S., Janiga, G. and Thévenin, D.: Energy dissipation rate as alternative hemolysis metric in stress-based models. In: XLIII Annual Congress of the European Society for Artificial Organs, Warsaw, Poland, 2016.

Eshghinejadfard, A., Abdelsamie, A. and Thévenin, D.: Lattice Boltzmann simulation of turbulent channel flows in the presence of spherical particles. In: 13th International Conference for Mesoscopic Methods in Engineering and Science, ICMMES, Hamburg, Germany, 2016.

Glaßer, S., Hirsch, J., Berg, P., Saalfeld, P., Beuing, O., Janiga, G. and Preim, B.: Evaluation of time-dependent wall shear stress visualizations for cerebral aneurysms. In: Bildverarbeitung für die Medizin (BVM), ISBN 978-3-662-49465-6, Berlin, 236-241, 2016.

Glaßer, S., Hoffmann, T., Voß, S., Klink, F. and Preim, B.: Extraction of patient-specific 3D cerebral artery and wall thickness models from 2D OCT and structured-light 3D scanner data. In: 15. Jahrestagung der Deutschen Gesellschaft für Computergestützte Chirurgie (CURAC), 978-3-86247-595-7, Germany, 2016.

Glaßer, S., Saalfeld, P., Berg, P., Merten, N. and Preim, B.: A quantitative and qualitative user study for comparative aneurysm surface visualizations. In: 6th Eurographics Workshop on Visual Computing for Biology and Medicine (VCBM), Bergen, Norway, ISBN 978-3-03868-010-9, 152-163, 2016.

Hagemeier, T., Zähringer, K., Jiang, Z. and Thévenin, D.: Influence of wetting behavior on macroscopic film flow pattern. In: 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, ISBN 978-989-98777-8-8, Paper 2.6.4, 1-17, 2016.

Kamranian Marnani, A., Bück, A., Antonyuk, S., Thévenin, D. and Tomas, J.: Study on the compression, flow and permeation of fine and ultra-fine, cohesive and compressible powders. In: 9th International Conference on Multiphase Flow, Firenze, Italy, 189/1-6, 2016.

Kamranian Marnani, A., Idowu, R., Bück, A., Antonyuk, S., Thévenin, D. and Tomas, J.: Classification of ultra-fine adhesive particles at fine cohesive powders. In: 12th International Conference on Bulk Materials Storage, Handling and Transportation, Darwin, Australia, ISBN 978-1-9221-0788-6, 1-10, 2016.

Kerst, C., Medeiros de Souza, L., Bartz, A., Temmel, E., Lorenz, H., Seidel-Morgenstern, A. and Janiga, G.: CFD-DEM unterstützte Untersuchung einer Bevorzugten Wirbelschichtkristallisation. In: ProcessNet-Jahrestreffen Kristallisation, Frankfurt, Germany, 3256, 2016.

Kováts, P. and Zähringer, K.: Simultaneous 2-Tracer-LIF and PIV for the study of mass transfer around single CO2-bubbles. In: 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, ISBN 978-989-98777-8-8, Paper 4.2.6, 1-18, 2016.

Lichtenberg, N., Cleynen, O. and Thévenin, D., Numerical investigations of a water vortex hydropower plant implemented as a fish ladder - Part I: The water vortex, in Sustainable Hydraulics in the Era of Global Change, (Erpicum et al., Eds.), Taylor & Francis Group, London, ISBN 978-1-138-02977-4, 277-283 (2016).

Meyer, J. and Thévenin, D.: Using centrifugal forces in a Pitot-tube jet-pump for cleaning and pumping oil-water mixtures in a continuous loop: an experimental study of separation efficiency. In: 9th International Conference on Multiphase Flow, Firenze, Italy, 2016.

Roloff, C., Kerst, C., Lukas, E., Tomas, J. and Thévenin, D.: Experimental and numerical investigation of a zigzag air classifier. In: ProcessNet-Jahrestreffen Schüttguttechnik, Mehrphasenströmungen und Computational Fluid Dynamics, Bingen, Germany, 2336, 2016.

Voß, S., Berg, P., Glaßer, S., Hoffmann, T., Weigand, S. and Janiga, G.: Cerebral vessels and aneurysms: What can we learn from patient-specific wall thickness? In: ECCOMAS, Crete, 8274, 2016.

Wagner, L.-M., Hohl, L., Medeiros de Souza, L., Thévenin, D. and Kraume, M.: CFD modelling of phase separation and coalescence in a micellar three-phase system. In: 9th International Conference on Multiphase Flow, Firenze, Italy, 2016.

Wagner, L.-M., Medeiros de Souza, L., Misra, A., Janiga, G. and Thévenin, D.: CFD-Simulation der Trennung eines mehrphasigen flüssig-flüssig-Systems in einem Dekanter. In: ProcessNet-Jahrestagung 2016, Aachen, Germany, 2016.

Wagner, L.-M., Thévenin, D., Siegmund, P., Sundmacher, K. and Zähringer, K.: PIV-measurements for an optimal reactor design and operation in liquid multiphase systems. In: 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, ISBN 978-989-98777-8-8, Paper 3.16.2, 1-10, 2016.

Theses

Daróczy, L., Practical issues in the optimization of CFD-based engineering problems, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Detmer, F.J., Gender differences in rupture rates and hemodynamics for middle cerebral artery bifurcation aneurysms based on CFD simulation, Master's Thesis LSS-M05/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Gao, F., Numerical simulation of combustion process in the combustion chamber of industrial furnaces, Master's Thesis LSS-M03/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Ghorpade, S., CFD Benchmark for a single strand tundish (Part II) including free surface interaction and transient heat transfer using Star-CCM+, Master's Thesis LSS-M03/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Gottschalk, R., Weiterführende 3D-CFD Simulation zur Untersuchung der Kolbenkühlung, Master's Thesis LSS-M04/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Güttler, N., Korrelation zwischen der 2D-Rheologie und dem Ablaufverhalten von applizierten Klarlacken, Master's Thesis LSS-M10/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Khalifa, A.A., Numerical simulations of reacting flows with multi-diffusion transport modeling in OpenFOAM, Master's Thesis LSS-M12/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Knopf, S., Implementierung einer Mikrozahnringpumpe für in-vitro PIV-Messungen an zerebralen Aneurysmen, Bachelor's Thesis LSS-B01/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Kroll-Gast, N., Strukturmechanische Betrachtung an einer Pitot-Pumpe, Master's Thesis LSS-M08/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Kulbeik, T.-A., Entwicklung eines virtuellen Mantelthermoelements in Brandsimulationsrechnungen zum Vergleich numerischer Simulationsergebnisse mit experimentell ermittelten Temperaturmessdaten, Master's Thesis LSS-M06/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Liang, Q., Validation of a multiphase model with focus on the influence of strong wall effects in bubble column, Master's Thesis LSS-M01/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Liu, Z., Numerical study of the fluid mixing in helical flows, Master's Thesis LSS-M07/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Manthey, S., Rekonstruktion von Druckverteilungen auf Basis von simulierten und gemessenen Geschwindigkeitsfeldern, Master's Thesis LSS-M13/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Marin, D., Berechnung und Überprüfung der geplanten Konstruktion einer Messtraverse mittels FEM-Simulation, Studienarbeit LSS-S02/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Medeiros de Souza, L., Model optimization and techniques for the simulation of multiphase chemical reactors, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Ni, Z., Improved sub-modelling for the Large Eddy Simulation of pulverised coal combustion, Master's Thesis LSS-M11/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Reeh, A., Simulation eines kontinuierlichen flüssig-fest Kristallisators mittels CFD-DEM Kopplung in StarCCM+, Master's Thesis LSS-M14/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Strobel, M. and Brecht, P., Entwicklung eines mobilen Systems für stehende Wellen in fließenden Gewässern, Master's Thesis LSS-M08/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Thoms, R., Development of a user-friendly software implementation for the design of wind turbine rotor blades for simulations, Master's Thesis LSS-M01/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

Yang, Y., Numerical investigation of the multiphase flow in a decanter, Master's Thesis LSS-M02/16, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2016).

2015

Journal articles

Ashraf Ali, B., Börner, M., Peglow, M., Janiga, G., Seidel-Morgenstern, A. and Thévenin, D., Coupled CFD-DEM simulations of a pilot scale batch crystallizer. Cryst. Growth Des. 15(1), (2015) 145-155.

Berg, P., Roloff, C., Beuing, O., Voß, S., Sugiyama, S.I., Aristokleus, N., Anayiotos, A., Ashton, N., Bressloff, N., Brown, A., Chung, B.J., Cebral, J.R., Copelli, G., Fu, W., Qiao, A., Geers, A., Hodis, S., Dragomir-Daescu, D., Imdieke, E., Khan, M., Valen-Sendstad, K., Kono, K., Meng, H., Xiang, J., Menon, P., Albal, P., Mierka, O., Munster, R., Morales, H., Osman, J., Goubergrits, L., Pallares, J., Cito, S., Passalacqua, A., Piskin, S., Pekkan, K., Ramalho, S., Marques, N., Sanchi, S., Schumacher, K., Sturgeon, J., Svihlova, H., Hron, J., Usera, G., Mendina, M., Steinman, D., and Janiga, G., The Computational Fluid Dynamics Rupture Challenge 2013 – Phase II: Variability of hemodynamic simulations in two intracranial aneurysms. J. Biomech. Eng. 137, (2015) 121008/1-13, doi: 10.1115/1.4031794.

Cito, S., Geers, A.J., Arroyo, M.P., Palero, V.R., Pallarés, J., Vernet, A., Blasco, J., San Román, L., Fu, W., Qiao, A., Janiga, G., Miura, Y., Ohta, M., Mendina, M., Usera, G., and Frangi, A.F., Accuracy and reproducibility of patient-specific hemodynamic models of stented intracranial aneurysms: Report on the Virtual Intracranial Stenting Challenge 2011. Ann. Biomed. Eng. 43(1), (2015) 154-167, http://dx.doi.org/10.1007/s10439-014-1082-9.

Daróczy, L., Janiga, G., Petrasch, K., Webner, M. and Thévenin, D., Comparative analysis of turbulence models for the aerodynamic simulation of H-Darrieus rotors. Energy 90, (2015) 680-690, http://dx.doi.org/10.1016/j.energy.2015.07.102.

Eger, T., Bol, T., Thévenin, D., Schroth, R. and Janiga, G., Preliminary numerical investigations of entropy generation in electric machines based on a canonical configuration. Entropy 17, (2015) 8187-8206.

Glöckner, H., Hagemeier, T., Müller, P., Roloff, C., Thévenin, D. and Tomas, J., Beschleunigter Sinkprozess fester Partikel bei laminarer und turbulenter Umströmung. Chem. Eng. Tech. 87(5), (2015) 1-13.

Hagemeier, T., Roloff, C., Bück, A. and Tsotsas, E., Estimation of particle dynamics in  2D-fluidized beds using particle tracking velocimetry. Particuol. 22, (2015) 39-51.

Janiga, G., Berg, P., Sugiyama, S., Kono, K. and Steinman, D.A., The Computational Fluid Dynamics Rupture Challenge 2013-Phase I: Prediction of rupture status in intracranial aneurysms. Am. J. Neuroradiol. 36(DOI http://dx.doi.org/10.3174/ajnr.A4157), (2015) 530-536.

Janiga, G., Daróczy, L., Berg, P., Thévenin, D., Skalej, M. and Beuing, O., An automatic CFD-based flow-diverter optimization principle for patient-specific intracranial aneurysms. J. Biomech. 48, (2015) 3846-3852.

Kerst, K., Medeiros de Souza, L., Bartz, A., Seidel-Morgenstern, A. and Janiga, G., CFD-DEM simulation of a fluidized bed crystallization reactor. Comput. Aided Chem. Eng. 37, (2015) 263-268.

Mann, H., Mueller, P., Hagemeier, T., Roloff, C., Thévenin, D. and Tomas, J., Analytical description of the unsteady settling of spherical particles in Stokes and Newton regimes. Granul. Matter 17, (2015) 629-644.

Rauchegger, C., Bayley, S., Schröder, V. and Thévenin, D., Dispersion of heavy gases - Experimental results and numerical simulations. Proc. Safety Prog. 34(3), (2015) 280-285.

 

Proceedings and Conferences

Abdelsamie, A. and Thévenin, D., Modulation of isotropic turbulence by resolved and non-resolved spherical particles, in Direct and Large-Eddy Simulation IX, (Fröhlich, J., Kuerten, H., Geurts, B.J. and Armenio, V., Eds.), Springer, 621-629 (2015).

Abdelsamie, A. and Thévenin, D., Direct Numerical Simulation of burning n-heptane droplets: auto-ignition and turbulence modulation mechanisms, in Direct and Large-Eddy Simulation X, Limassol, Cyprus, Paper 152 (2015).

Abdelsamie, A. and Thévenin, D.: Auto-ignition probability of ethylene/air mixture: Comparison between detailed chemistry and tabulated chemistry. In: 5th International Workshop on Model Reduction in Reacting Flows, Cottbus, Germany, 2015.

Abdelsamie, A. and Thévenin, D.: Comparison between ODT and DNS for ethylene/air auto-ignition. In: 15th International Conference on Numerical Combustion, Avignon, France, 24, 2015.

Abdelsamie, A. and Thévenin, D.: Direct numerical simulation of the auto-ignition of turbulent ethylene/air mixtures. In: 15th International Conference on Numerical Combustion, Avignon, France, 42, 2015.

Berg, P., Abdelsamie, A. and Janiga, G.: Possible transitional flow in a giant intracranial aneurysm: finite volume approach versus Direct Numerical Simulation. In: 4th International Conference on Computational and Mathematical Biomedical Engineering – CMBE2015, (Nithiarasu, P. and Budyn, E., Eds.) Cachan, France, 567-570, 2015.

Berg, P., Beuing, O. and Janiga, G.: Blood flow analysis in a ruptured intracranial aneurysm: a long-term study. In: Conference on Modelling Fluid Flow (the 16th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, 102/1-8, 2015.

Berg, P., Daróczy, L., Beuing, O. and Janiga, G.: Patient-specific treatment of intracranial aneurysms: an automatic CFD-based flow-diverter optimization principle. In: Summer Biomechanics, Bioengineering and Biotransport Conference SB3C, Snowbird, Utah, 356-357, 2015.

Berg, P., Iosif, C., Ponsonnard, S., Pedrolo-Silveira, E., Yardin, C., Janiga, G. and Mounayer, C.: Impact of the flow-diverter deployment strategy on side branch endothelialization: Over- versus Undersizing. In: Interdisciplinary Cerebrovascular Symposium/Intracranial Stent Meeting, Gold Coast, Australia, 6, 2015.

Bol, T., Eger, T., Janiga, G., Schroth, R. and Thévenin, D.: Preliminary numerical investigations of entropy generation in electric machines based on a canonical configuration. In: 7th International Exergy, Energy and Environment Symposium, Valenciennes, France, 018/1-9, 2015.

Buchtatyj, D., Dragomirov, P., Thévenin, D., Beyrau, F. and Bartel, D.: Numerische Strömungsberechnung von dieselmotorischen Vorgängen. In: 12. Magdeburger Maschinenbau-Tage, (R. Kasper, Ed.), Otto-von-Guericke-Univ. Magdeburg, ISBN 978-3-944722-26-9, A8-4/1-11, 2015.

Daróczy, L., Berg, P., Beuing, O. and Janiga, G.: How can physicians benefit from hemodynamic simulations? An individualized therapy planning approach for intracranial aneurysms. In: Interdisciplinary Cerebrovascular Symposium/Intracranial Stent Meeting, Gold Coast, Australia, 8, 2015.

Daróczy, L., Janiga, G. and Thévenin, D.: Correlation of the power coefficients of H-Darrieus Wind Turbines obtained using different turbulence models in CFD computations. In: Conference on Modelling Fluid Flow (the 16th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, 017/1-8, 2015.

Daróczy, L., Mohamed, M.H. and Thévenin, D.: Numerical aero-acoustics assessment of double-airfoil vertical axis  wind turbine. In: DAGA, (Becker, S., Ed.) Nürnberg, Germany, ISBN 978-3-939296-08-9, 534-537, 2015.

Dietzsch, F., Hasse, C., Fru, G. and Thévenin, D., The influence of differential diffusion in turbulent oxygen-enhanced methane flames, in Direct and Large-Eddy Simulation IX, (Fröhlich, J., Kuerten, H., Geurts, B.J. and Armenio, V., Eds.), Springer, 511-517 (2015).

Eger, T., Thévenin, D., Janiga, G., Bol, T. and Schroth, R.: Numerical investigations of residence time distribution of air in electric machines based on a canonical configuration. In: Conference on Modelling Fluid Flow (the 16th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, 034/1-8, 2015.

Eshghinejadfard, A., Janiga, G. and Thévenin, D.: Calculation of the permeability in porous media using the Lattice Boltzmann method. In: Conference on Modelling Fluid Flow (the 16th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, 052/1-7, 2015.

Eshghinejadfard, A. and Thévenin, D.: Modeling the sedimentation behavior of single and multiple spheroidal particles using lattice Boltzmann method. In: 24th International Conference on Discrete Simulation of Fluid Dynamics (DSFD), Edinburgh (UK), 101, 2015.

Fru, G., Thévenin, D. and Markus, D., Direct Numerical Simulations of turbulent H2-Air pre-mixtures and analysis towards safety-relevant ignition prediction, in Direct and Large-Eddy Simulation IX, (Fröhlich, J., Kuerten, H., Geurts, B.J. and Armenio, V., Eds.), Springer, 525-531 (2015).

Glaßer, S., Berg, P., Neugebauer, M. and Preim, B.: Reconstruction of 3D surface meshes for blood flow simulations of intracranial aneurysms. In: 14. Jahrestagung der Deutschen Gesellschaft für Computergestützte Chirurgie (CURAC), Bremen, Germany, 163-168, 2015.

Glaßer, S., Hoffmann, T., Boese, A., Voß, S., Kalinski, T., Skalej, M. and Preim, B.: Histology-based evaluation of Optical Coherence Tomographic characteristics of the cerebral artery wall via virtual inflating. In: Eurographics Workshop on Visual Computing for Biology and Medicine, (Bühler, K., Linsen, L. and John, N.W., Eds.), Chester, UK, 1-10, 2015.

Glöckner, H., Roloff, C., Thévenin, D. and Tomas, J.: Numerical simulation and validation of single-phase and two-phase flows in zigzag air classifiers. In: 10th European Congress on Chemical Engineering ECCE10, Nice, France, 2015.

Iosif, C., Berg, P., Ponsonnard, S., Carles, P., Trolliard, G., Pedrolo-Silveira, E., Mendes, G., Saleme, S., Yardin, C. and Mounayer, C.: Flow competition as a factor of patency or occlusion of side branches after flow diverting stent placement in intracranial arteries: From animal translational research to CFD simulation and to clinical practice. In: Interdisciplinary Cerebrovascular Symposium/Intracranial Stent Meeting, Gold Coast, Australia, 11, 2015.

Janiga, G., Berg, P. and Thévenin, D.: Overview on the Computational Fluid Dynamics Challenge 2013 for rupture-prediction in two intracranial aneurysms. In: 10th International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, Rotterdam, The Netherlands, 8, 2015.

Janiga, G., Fru, G., Abdelsamie, A. and Thévenin, D.: Probability of hotspot ignition in turbulent hydrogen-air mixtures using Direct Numerical Simulations. In: 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, P3-81/1-6, 2015.

Kerst, K., Medeiros de Souza, L., Bartz, A., Seidel-Morgenstern, A. and Janiga, G., CFD-DEM simulation of a fluidized bed crystallization reactor, in Computer Aided Chemical Engineering, (Gernaey, K.V., Huusom, J.K. and Gani, R., Eds.), Elsevier, 263-268 (2015).

Kerst, K., Medeiros de Souza, L., Seidel-Morgenstern, A. and Janiga, G.: CFD-DEM simulation of a fluidized bed crystallization reactor. In: 12th PSE and 25th ESCAPE Joint Event, Copenhagen, Denmark, 40, 2015.

Kováts, P., Thévenin, D. and Zähringer, K.: Fluiddynamical characterization of a bubble column for investigation of mass-transfer. In: Conference on Modelling Fluid Flow (the 16th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, 067/1-7, 2015.

Kováts, P., Thévenin, D. and Zähringer, K.: Experimentelle Untersuchung von Strömungsfeldern in den Zwischenräumen grober Schüttungen. In: 23. Fachtagung Lasermethoden in der Strömungsmesstechnik, (Czarske, J., Büttner, L., Fischer, A., Ruck, B., Leder, A. and Dopheide, D. Eds.), Dresden, Germany, GALA, ISBN 978-3-9816764-1-9, 54/1-7, 2015.

Lichtenberg, N. and Thévenin, D.: Numerical investigation of the flow around the stopper in a tundish using a multi-phase flow approach and experiments in water models for validation In: Symposium zur Simulation Metallurgischer Prozesse, Feuerkogel, Österreich, 2015.

Meyer, J., Daróczy, L., Janiga, G. and Thévenin, D.: Using 3D shape optimization to reduce turbulent mixing losses inside the rotor cavity of a Pitot-Tube-Jet-Pump for fluid-fluid separation. In: Conference on Modelling Fluid Flow (the 16th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, 064/1-8, 2015.

Ranga Dinesh, K.K.J., Shalaby, H., Luo, K.H. and Thévenin, D.: Flame structure analysis for turbulent lean premixed spherical flames at elevated pressures. In: 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, P4-27/1-6, 2015.

Ranga Dinesh, K.K.J., Shalaby, H., Luo, K.H. and Thévenin, D.: Influence of preferential diffusion in turbulent lean premixed hydrogen-rich syngas spherical flames at elevated pressure. In: 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, P4-28/1-6, 2015.

Schießl, R., Bykov, V., Maas, U., Abdelsamie, A. and Thévenin, D.: The (mis)alignment of diffusive fluxes in turbulent combustion: DNS analysis and treatment in the Reaction-Diffusion Manifold (REDIM) model. In: 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, P4-63/1-6, 2015.

Theile, M., Hassel, E., Thévenin, D. and Buchholz, B.: Analyse der Gemischbildung eines saughubeinspritzenden Ottomotors mit der Grobstruktursimulation. In: 12. Magdeburger Maschinenbau-Tage, (R. Kasper, Ed.), Otto-von-Guericke-Univ. Magdeburg, ISBN 978-3-944722-26-9, A8-1/1-11, 2015.

Theile, M., Hassel, E., Thévenin, D. and Buchholz, B.: Scale-resolving simulation of injection and mixture formation in a DISI-Engine. In: ANSYS Conference & 33rd CADFEM Users' Meeting 2015, Bremen, Germany, 2015.

Thévenin, D., DNS and LES of transitional and two-phase flows, in Direct and Large-Eddy Simulation X, Limassol, Cyprus, Keynote Lecture, P20 (2015).

Voß, S., Berg, P., Glaßer, S., Hoffmann, T. and Janiga, G.: Fluid-structure interaction in an intracranial aneurysm: The effect of patient-specific wall thickness on the hemodynamic flow. In: 9th European Solid Mechanics Conference (ESMC 2015), Madrid, Spain, 1-2, 2015.

Voß, S., Berg, P., Glaßer, S., Hoffmann, T. and Janiga, G.: Fluid-structure interaction in cerebral blood vessels: The effect of patient-specific wall thickness on local wall stresses. In: International Conference on Biomedical Technology, Hannover, Germany, 1-2, 2015.

Voß, S., Berg, P., Glaßer, S., Hoffmann, T. and Janiga, G.: Fluid-Struktur-Simulationen von zerebralen Blutgefäßen und Aneurysmen. In: 12. Magdeburger Maschinenbau-Tage, (R. Kasper, Ed.), Otto-von-Guericke-Univ. Magdeburg, ISBN 978-3-944722-26-9, B7-2/1-10, 2015.

Voß, S., Berg, P., Hoffmann, T., Glaßer, S., Beuing, O. and Janiga, G.: The role of patient-specific vessel wall thickness for the rupture prediction of intracranial aneurysms. In: Interdisciplinary Cerebrovascular Symposium/Intracranial Stent Meeting, Gold Coast, Australia, 42, 2015.

Zähringer, K., Wagner, L.-M., Kováts, P. and Thévenin, D., Experimental characterization of the mass transfer from gas to liquids in a two-phase bubble column, in 7th International Berlin Workshop (IBW7) on Transport Phenomena with Moving Boundaries and More, (Schindler, F.-P. and Krause, M., Eds.), VDI 3, Nr. 947, ISBN 978-3-18-394703-4, 82-90 (2015).

Zähringer, K., Pliavaka, K. and Thévenin, D.: Influence of oxygen excitation by a RF plasma discharge on the flow field of atmospheric partially-premixed CH4/O2 and H2/O2 flames. In: 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, P5-22/1-5, 2015.

 

Theses

Berg, P., CFD-basierte hämodynamische Untersuchung patientenspezifischer intrakranieller Aneurysmen, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Bünger, A., Reconstruction of a two-dimensional distribution from its first moments, Bachelor's Thesis LSS-B07/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Darbanan, A.F., Numerical investigations of spray using Lagrangian and Eulerian methods, Master's Thesis LSS-M07/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Engel, S., Optimizing the hydraulic efficiency of a Tesla pump, Master's Thesis LSS-M05/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Fischer, L., Numerische Blutflusssimulation in menschlichen Aortenbögen mittels StarCCM+, Master's Thesis LSS-M07/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Gerloff, C., Identifikation eines geeigneten Verfahrens zur Modellierung einer Thrombosebildung in intrakraniellen Aneurysmen, Bachelor's Thesis LSS-B06/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Goedeke, M., Flüssigphasen-Geschwindigkeitsmessungen in einem begasten Druck-Rührreaktor mittels PIV, Master's Thesis LSS-M02/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Hehemann, S., Optimierung der Haftgrundvorbereitung für das thermische Spritzen, Bachelor's Thesis LSS-B05/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Hermann, D., Simulation des turbulenten Strömungsfeldes im Zick-Zack-Sichter, Bachelor's Thesis LSS-B10/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Janbazi, H., Simulation of a crystallization reactor using Discrete Phase Model (DPM) and Quadrature-Based Method of Moments (QBMOM), Master's Thesis LSS-M09/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Lukas, E., Messtechnische Erfassung strömungsmechanischer Vorgänge in einem Zickzacksichter, Master's Thesis LSS-M04/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Meyer, J., Potentialanalyse zur CO2-Optimierung eines Nutzfahrzeugdieselmotors, Bachelor's Thesis LSS-B08/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Müller, S., Simulation der Fluid-Struktur-Interaktion an einem flexiblen oszillierenden aerodynamischen Profil mit der Opensource Toolbox OpenFOAM extend, Bachelor's Thesis LSS-B09/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Pachel, R., Fluid-Strukturkopplung eines axial umströmten, dünnwändigen Zylinders im niedrigen Überschallbereich, Bachelor's Thesis LSS-B06/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Salender, M., Außendruckunabhängige Außenluftansaugung für Fahrzeuge im S-Bahn bzw. Regionalbahnbereich bis 160 km/h, Master's Thesis LSS-B07/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Schmidt, V., Charakterisierung eines Blasensäulen-Sets mit starken Randeffekten und variablen Strömungsdurchmessern, zur Bestimmung von Betriebsparametern für den Eintrag von Pulvern mit unterstützender Begasung, Studienarbeit LSS-S02/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Schulz, F., Numerical investigations of laryngeal airflows in a patient-specific geometry using StarCCM+, Bachelor's Thesis LSS-B04/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Sell, K., Vergleich von Stereo-PIV und MRT-Messungen an einem Phantommodell eines zerebralen Aneurysmas, Bachelor's Thesis LSS-B03/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Senkel, A., Energetische Optimierung von Kühlwasserkreisläufen auf Schiffen durch die Drehzahlregelung von Pumpen, Bachelor's Thesis LSS-B05/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Steinmüller, R., Untersuchung zum Trennungsverhalten von flüssig-flüssig Gemischen unter Einfluss von Zentrifugalkräften, Bachelor's Thesis LSS-B01/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Stolz, J., Ermittlung der Anwendungsparameter für einen Vakuumdichtigkeitstest mittels Helium in der A350XWB Flügelschalenproduktion, Bachelor's Thesis LSS-B02/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Venkatraman, S.T., Optimierung mechanischer und aerodynamischer Kennwerte an einem Vertikal-Windrad, Master's Thesis LSS-M09/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Voß, S., Untersuchung des Einflusses von Fluid-Struktur-Interaktionen auf die Hämodynamik intrakranieller Aneurysmen, Master's Thesis LSS-M04/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Yu, H., Flow design optimization of blood pumps considering hemolysis, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Zibell, R., Numerische Berechnung zur thermischen Absicherung relevanter Baugruppen, mithilfe von Fluid-Struktur-Interaktionen FSI in OpenFOAM, Master's Thesis LSS-M05/15, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

Zistl, C., File-based post-processing of DNS results for turbulent flames using Matlab, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2015).

2014

Journal articles

Berg, P., Stucht, D., Janiga, G., Beuing, O., Speck, O. and Thévenin, D., Cerebral blood flow in a healthy circle of Willis and two intracranial aneurysms: Computational Fluid Dynamics versus 4D Phase-Contrast Magnetic Resonance Imaging. J. Biomech. Eng. 136(4, doi: 10.1115/1.4026108), (2014) 041003/1-9.

Daróczy, L., Janiga, G. and Thévenin, D., Systematic analysis of the heat exchanger arrangement problem using Multi-Objective Genetic Optimization. Energy 65, (2014) 364-373.

Daróczy, L. and Jármai, K., From a quasi-static fluid-based evolutionary topology optimization to a generalization of BESO. Eng. Optim. 47 (5), (2014) 689-705.

Hagemeier, T., Bordás, R., Zähringer, K. and Thévenin, D., Two-perspective fluorescence analysis of droplets creeping down a tilted plate. Exp. Fluids 55(1), (2014) 1639/1-14.

Hagemeier, T., Glöckner, H., Roloff, C., Thévenin, D. and Tomas, J., Simulation of multi-stage particle classification in zigzag apparatus. Chem. Eng. Technol. 37(5), (2014) 879-887.

Janiga, G., Large-eddy simulation of the FDA benchmark nozzle for a Reynolds number of 6500. Comput. Biol. Med. 47, (2014) 113-119.

Oeltze, S., Lehmann, D.J., Kuhn, A., Janiga, G., Theisel, H. and Preim, B., Blood flow clustering and applications in virtual stenting of intracranial aneurysms. IEEE Trans. Vis. Comput. Graph. 20(5), (2014) 686-701.

Oster, T., Lehmann, D.J., Fru, G., Theisel, H. and Thévenin, D., Sparse representation and visualization for Direct Numerical Simulation of premixed combustion. Comput. Graph. Forum 33(3, DOI: 10.1111/cgf.12388), (2014) 1-10.

Ranut, P., Janiga, G., Nobile, E. and Thévenin, D., Multi-objective shape optimization of a tube bundle in cross-flow. Int. J. Heat Mass Trans. 68, (2014) 585-598.

Schmeyer, E., Bordás, R., Thévenin, D. and John, V., Numerical simulations and measurements of a Droplet Size Distribution in a turbulent vortex street. Met. Zet. 23(4), (2014) 387–396.

Shalaby, H., Luo, K.H. and Thévenin, D., Response of curved premixed flames to single-frequency and wideband acoustic waves. Combust. Flame 161(11), (2014) 2868-2877.

Siewert, C., Bordás, R., Wacker, U., Beheng, K.D., Kunnen, R.P.J., Meinke, M., Schröder, W. and Thévenin, D., Influence of turbulence on the drop growth in warm clouds, Part I: Comparison of numerically and experimentally determined collision kernels. Met. Zet. 3(4), (2014) 397–410.

Zähringer, K., The use of vitamins as tracer dyes for laser-induced fluorescence in liquid flow applications. Exp. Fluids 55(4), (2014) 1712/1-11.

Proceedings and Conferences

Abdelsamie, A. and Thévenin, D.: Modulation of turbulent properties in a spray flame burning n-Heptane using Direct Numerical Simulation. In: 35th Symposium (International) on Combustion, San Francisco, Poster presentation, 2014.

Berg, P., Abdelsamie, A., Janiga, G. and Thévenin, D.: Large Eddy Simulation in intracranial aneursyms: should transition be considered in numerical modeling? In: 11th World Congress on Computational Mechanics, Barcelona, Spain, (Oñate, E., Oliver, X. and Huerta, A., Eds.), Paper MS233A-2, 2014.

Berg, P., Baumgarten, K., Geist, S., Stucht, D., Speck, O. and Janiga, G.: Relative pressure field computation in human arteries based on 4D Phase-Contrast MRI velocities. In: 11th IEEE International Symposium on Biomedical Imaging, Beijing, China, ISBN 978-1-4673-1961-4/14, 417-420, 2014.

Berg, P., Daróczy, L., Beuing, O., Skalej, M., Thévenin, D. and Janiga, G.: CFD-based investigation of various flow diverter stent compressions in a patient-specific giant aneurysm. In: Interdisciplinary Cerebrovascular Symposium, Zurich, Switzerland, 4.2/1-2, 2014.

Berg, P., Roloff, C., Janiga, G. and Thévenin, D.: Vergleich zwischen hämodynamischer Simulation und optischer Lasermessung des Blutflusses in zwei zerebralen Aneurysmen. In: 17. IFF-Wissenschaftstage "Digitales Engineering zum Planen, Testen und Betreiben technischer Systeme", (M. Schenk, Ed.), Magdeburg, Germany, Paper 137, 2014.

Daróczy, L., Janiga, G. and Thévenin, D.: Genetic optimization of heat-exchanger arrangement problem. In: ProcessNet-Jahrestagung Computational Fluid Dynamics, Mischvorgänge und Rheologie, Würzburg, Germany, 1, 2014.

Daróczy, L., Janiga, G. and Thévenin, D.: Computational Fluid Dynamics (CFD) simulations of an H-Darrieus rotor with different turbulence models. In: 11th World Congress on Computational Mechanics, Barcelona, Spain, (Oñate, E., Oliver, X. and Huerta, A., Eds.), Paper MS215A-3, 2014.

Daróczy, L., Mohamed, M.H., Janiga, G. and Thévenin, D.: Analysis of the effect of a slotted flap mechanism on the performance of an H-Darrieus turbine using CFD. In: ASME Turbo Expo Conference, Frankfurt, Paper GT2014-25250, 2014.

Eger, T., Thévenin, D., Janiga, G., Bol, T. and Schroth, R., Identification of a canonical configuration for a quantitative analysis of transport phenomena in electric machines based on entropy generation, in Energy and Sustainability, (Al-Kayiem, H.H., Brebbia, C.A. and Zubir, S.S., Eds.), WIT Transactions on Ecology and the Environment, Vol. 186, WIT Press, 751-762 (2014).

Eshghinejadfard, A., Abdelsamie, A., Oster, T. and Thévenin, D.: Impact of the collision model for fully resolved particles interacting in a fluid. In: ASME 2014 Fluids Engineering Summer Meeting (FEDSM2014), Chicago, Illinois, Paper FEDSM2014-21447, 2014.

Eshghinejadfard, A. and Thévenin, D.: Immersed boundary lattice Boltzmann modeling of particulate flows using different discrete delta functions and force schemes. In: 23rd International Conference on Discrete Simulation of Fluid Dynamics (DSFD), Paris, CP5, 2014.

Hagemeier, T., Roloff, C., Bück, A. and Tsotsas, E.: Comparative study on optical measurement techniques for the estimation of particle velocities in dense two-phase flows. In: 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 134/1-15, 2014.

Janiga, G.: Turbulent flow simulation in a pipe based on Large Eddy Simulation. In: microCAD’14 International Scientific Conference, (Kékesi, T., Ed.), Miskolc, Hungary, ISBN 978-963-358-051-6, D16/1-8, 2014.

Linseisen, B.: Simulation of low temperature Helium releases with OpenFOAM. In: 9th OpenFOAM Workshop, Zagreb, Croatia, OFW09.0070, 2014.

Lucius, A., Thévenin, D., Brenner, G. and Lehwald, A.: Experimental and numerical analysis of flow instabilities in a radial fan. In: ASME Turbo Expo Conference, Frankfurt, Paper GT2014-27112, 2014.

Meyer, J., Daróczy, L. and Thévenin, D.: New design approach for Pitot-tube jet pump. In: ASME Turbo Expo Conference, Frankfurt, Paper GT2014-25310, 2014.

Meyer, J., Daróczy, L. and Thévenin, D.: Optimizing the external geometry of a pick-up tube for a Pitot-tube-jet pump. In: 4th International Conference on Engineering Optimization, Lisbon, 2014.

Meyer, J. and Thévenin, D.: 3D CFD calculations for a Pitot-tube jet pump and experimental validation. In: 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ISROMAC-15, Honolulu, Hawai, USA, 1-8, 2014.

Politz, C., Roloff, C., Geisler, R. and Schröder, A.: Free flight boundary layer investigations by means of Particle Image Velocimetry. In: 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 132/1-9, 2014.

Rauchegger, C., Bayley, S., Schröder, V. and Thévenin, D.: Dispersion of heavy gases: Experimental results and numerical simulations. In: 10th Global Congress on Process Safety (AIChE/GCPS2014), New Orleans, 1-13, 2014.

Roloff, C., Berg, P., Bendicks, C., Zähringer, K., Janiga, G. and Thévenin, D.: Flow investigation inside a cerebral giant aneurysm. In: 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 330/1-8, 2014.

Roloff, C., Berg, P., Janiga, G. and Thévenin, D.: Particle Image Velocimetry for validation of aneurysm blood flow simulations - comparison of planar and stereo-technique. In: 11th World Congress on Computational Mechanics, Barcelona, Spain, (Oñate, E., Oliver, X. and Huerta, A., Eds.), Paper MS052A-5, 2014.

Theile, M., Hassel, E., Thévenin, D. and Buchholz, B.: Large Eddy Simulation of the cold flow of a DISI-engine and validation with High-Speed PIV measurements. In: LES4ICE, IFP, Rueil-Malmaison, France, 2014.

Zähringer, K.: Chlorophyll and other naturally occurring tracer dyes for laser-induced fluorescence in liquid flow applications. In: 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 62/1-7, 2014.

Zähringer, K., Pliavaka, K., Thévenin, D. and Riedel, U.: Influence of excited oxygen generated by a RF plasma discharge on atmospheric partially-premixed CH4/O2 and H2/O2 flames. In: 45th AIAA Plasmadynamics and Lasers Conference, Atlanta, Georgia, AIAA 2014-42241, 2014.

Zähringer, K., Wagner, L.-M., Kováts, P. and Thévenin, D.: Experimental characterization of the mass transfer from gas to liquids in a two-phase bubble column. In: 7th International Workshop on Transport Phenomena with Moving Boundaries, Berlin, Germany, 2014.

Theses

Abraham, N., Verifikation und Validierung der Wärmeübertragung in OpenFOAM, Diplomarbeit LSS-D02/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Arányi, P., Application of Proper Orthogonal Decomposition in complex flows, Master's Thesis LSS-M03/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Benecke, J., Untersuchung des Einflusses von durch Plasma erzeugten, elektronisch angeregtem Sauerstoff auf die Verbrennung von Wasserstoff, Master's Thesis LSS-M03/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Boljahn, D., Quantifizierung der Oberflächenverschmutzung eines Windschutzscheibenmodelles im Windkanalexperiment, Master's Thesis LSS-M01/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Brandt, N., Aufbau, Inbetriebnahme und Charakterisierung einer Blasensäule zur Untersuchung von Transportprozessen in Mehrphasensystemen, Bachelor's Thesis LSS-B03/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Felischak, M., Numerische Strömungssimulation durch Festkörperschäume, Master's Thesis LSS-M06/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Franke, E., Aufbau, Erprobung und Einsatz eines Extinktionsmessgerätes zur Bestimmung der Dichte von Rauch in Rettungswegen, Master's Thesis LSS-M02/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Gurn, P. and Zibell, R., Validierung und Verifikation von CFD-Simulation multi-skaliger Wassermodelle mit experimentellen PIV-Messungen, Studienarbeit LSS-S02/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Häusler, A., Vergleich von PIV- und Stereo-PIV-Messungen an Phantommodellen zerebraler Aneurysmen, Bachelor's Thesis LSS-B04/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Henneberg, M., Strömungssimulation eines Batch-Kristallisators, Studienarbeit LSS-S01/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Hörner, S., Numerische Simulation einer H-Darrieus Turbine im Wasser, Master's Thesis LSS-M10/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Keitel, J., Charakterisierung von Flüssigkeitsfilmen mittels Fluoreszenzmesstechnik, Bachelor's Thesis LSS-B02/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Koch, T., Numerische Strömungssimulation in einem statischen Mischer mittels OpenFOAM, Master's Thesis LSS-M07/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Kulbeik, T.-A., Fehlerabschätzung beim Einsatz von Thermoelementen in Bränden, Bachelor's Thesis LSS-B06/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Lausch, C., Untersuchung der Druckluftauskopplungsmöglichkeiten aus einer Gas-und-Dampfturbinenanlage, Master's Thesis LSS-M06/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Martello, G., Direct Numerical Simulation with the open-source software OpenFOAM, Master's Thesis LSS-M08/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Nasserian, E., Surface Tension Measurement Device (STM), Master's Thesis LSS-M05/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Reichardt, C., Zwei-Farben laser-induzierte Fluoreszenz zur Bestimmung des Massenübergangs von Gasblasen in einer Flüssigkeit, Bachelor's Thesis LSS-B05/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Urbanski, B., Automatisierte Geometrieoptimierung der Kolbenmulde eines Dieselmotors zur Reduzierung von Verbrauch und Emissionen durch Kopplung von CAD- und CFD-Software, Diplomarbeit LSS-D02/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Wagner, L.-M., Transportphysikalische Charakterisierung einer Blasensäule mit TMS-Lösungsmittelsystemen, Master's Thesis LSS-M02/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

Zschörner, C., Berechnung instationärer Druckfelder im menschlichen Gefäßsystem auf Basis gemessener PC-MRI Geschwindigkeiten, Diplomarbeit LSS-D01/14, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2014).

 

2013

Journal articles

Arányi, P., Janiga, G., Zähringer, K. and Thévenin, D., Analysis of different POD methods for PIV-measurements in complex unsteady flows. Int. J. Heat Fluid Flow 43, (2013) 204-211.

Ashraf Ali, B., Janiga, G., Temmel, E., Seidel-Morgenstern, A. and Thévenin, D., Numerical analysis of flow characteristics and crystal motion in a batch crystallizer. J. Cryst. Growth 372, (2013) 219-229.

Berg, P., Janiga, G., Beuing, O., Neugebauer, M. and Thévenin, D., Hemodynamics in multiple intracranial aneurysms: The role of shear related to rupture. Int. J. Biosci. Biochem. Bioinf. 3(3), (2013) 177-181.

Berg, P., Janiga, G., Beuing, O., Rössl, C. and Thévenin, D., Virtual Intracranial Stenting: How does stent porosity influence hemodynamics? Interv. Neurorad. 19(1), (2013) 191.

Berg, P., Janiga, G., Gasteiger, R., Beuing, O. and Thévenin, D., Rupture prediction in intracranial aneurysms – Advanced flow structure detection at known rupture sites. Interv. Neurorad. 19(1), (2013) 190.

Bordás, R., John, V., Schmeyer, E. and Thévenin, D., Numerical methods for the simulation of an aggregation-driven droplet size distribution. Theor. Comp. Fluid Dyn. 27, (2013) 253-271.

Bordás, R., Roloff, C., Thévenin, D. and Shaw, R., Experimental determination of droplet collision rates in turbulence. New J. Phys. 15(045010), (2013) 1-31.

Janiga, G., Berg, P., Beuing, O., Neugebauer, M., Gasteiger, R., Preim, B., Rose, G., Skalej, M. and Thévenin, D., Recommendations for accurate numerical blood flow simulations of stented intracranial aneurysms. Biomed. Eng. 58(3), (2013) 303-314.

Janiga, G., Berg, P., Beuing, O., Skalej, M. and Thévenin, D., Computational hemodynamics in a patient–specific aneurysm treated with Web-Device. Interv. Neurorad. 19(1), (2013) 150.

Janiga, G., Berg, P. and Thévenin, D., Report on the „Computational Fluid Dynamics Challenge 2013 for rupture-prediction in intracranial aneurysms“. Interv. Neurorad. 19(1), (2013) 191.

Janiga, G., Rössl, C., Skalej, M. and Thévenin, D., Realistic virtual intracranial stenting and Computational Fluid Dynamics for treatment analysis. J. Biomech. 46, (2013) 7-12.

Medeiros de Souza, L., Haida, H., Thévenin, D., Seidel-Morgenstern, A. and Janiga, G., Model selection and parameter estimation for chemical reactions using global model structure. Comput. Chem. Eng. 58, (2013) 269-277.

Meyer, J., Medeiros de Souza, L., Janiga, G. and Thévenin, D., Simulation des Trennungsvorgangs einer instabilen Emulsion mittels numerischer Strömungsmechanik. Chem. Ing. Tech. 85(9), (2013) 1379-1380.

Neugebauer, M., Lawonn, K., Beuing, O., Berg, P., Janiga, G. and Preim, B., AmniVis - A system for qualitative exploration of near-wall hemodynamics in cerebral aneurysms. Comput. Graph. Forum 32(3), (2013) 1-10.

Roloff, C., Bordás, R., Nickl, R., Mátrai, Z., Szaszák, N., Szabó, S. and Thévenin, D., Investigation of the velocity field in a full-scale model of a cerebral aneurysm. Int. J. Heat Fluid Flow 43, (2013) 212-219.

Steinman, D.A., Hoi, Y., Fahy, P., Morris, L., Walsh, M.T., Aristokleous, N., Anayiotos, A.S., Papaharilaou, Y., Arzani, A., Shadden, S.C., Berg, P., Janiga, G., Bols, J., Segers, P., Bressloff, N.W., Cibis, M., Gijsen, F.H., Cito, S., Pallarés, J., Browne, L.D., Costelloe, J.A., Lynch, A.G., Degroote, J., Vierendeels, J., Fu, W., Qiao, A., Hodis, S., Kallmes, D.F., Kalsi, H., Long, Q., Kheyfets, V.O., Finol, E.A., Kono, K., Malek, A.M., Lauric, A., Menon, P.G., Pekkan, K., Moghadam, M.E., Marsden, A.L., Oshima, M., Katagiri, K., Peiffer, V., Mohamied, Y., Sherwin, S.J., Schaller, J., Goubergrits, L., Usera, G., Mendina, M., Valen-Sendstad, K., Habets, D.F., Xiang, J., Meng, H., Yu, Y., Karniadakis, G.E., Shaffer, N., and Loth, F., Variability of Computational Fluid Dynamics solutions for pressure and flow in a giant aneurysm: The ASME 2012 Summer Bioengineering Conference CFD Challenge. J. Biomech. Eng. 135(2), (2013) 021015.

Proceedings and Conferences

Abdelsamie, A., Chittipotula, T., Lee, C. and Thévenin, D.: Stationary and decaying turbulence modulation by finite-size fully resolved particles. In: 8th International Conference on Multiphase Flow, Jeju, Korea, 324/1-8, 2013.

Abdelsamie, A. and Thévenin, D.: Turbulence modulation by fully resolved particles using immersed boundary methods. In: Joint EUROMECH/ERCOFTAC Colloquium on Immersed Boundary Methods, Leiden, The Netherlands, 145-147, 2013.

Abdelsamie, A. and Thévenin, D., Modulation of isotropic turbulence by resolved and non-resolved spherical particles, in Direct and Large-Eddy Simulation IX, (Fröhlich, J., Ed.), Dresden, 62-63 (2013).

Berg, P., Abdelsamie, A., Yu, H., Janiga, G. and Thévenin, D.: Multi-phase blood flow modeling in intracranial aneurysms considering possible transition to turbulence. In: ASME Summer Bioengineering Conference, Oregon, USA, SBC2013-14289, poster presentation, 2013.

Berg, P., Abdelsamie, A., Yu, H., Janiga, G. and Thévenin, D.: Multi-phase blood flow modeling in intracranial aneurysms considering possible transition to turbulence. In: 8th International Symposium on Turbulence and Shear Flow Phenomena, Poitiers, France, BIOE/1-6, 2013.

Berg, P., Janiga, G., Beuing, O., Neugebauer, M., Skalej, M. and Thévenin, D.: Hemodynamics in multiple intracranial aneurysms: The role of shear related to rupture. In: International Conference on Bioinformatics and Biomedical Technology (ICBBT 2013), Macau, China, 2013.

Berg, P., Janiga, G., Beuing, O., Rössl, C. and Thévenin, D.: Virtual Intracranial Stenting: How does stent porosity influence hemodynamics? In: 12th Congress of the World Federation of Interventional and Therapeutics Neuroradiology, Buenos Aires, Argentina, Paper 395, 2013.

Berg, P., Janiga, G., Beuing, O. and Thévenin, D.: Evaluation of hemodynamic parameters before and after bleb formation in intracranial aneurysms using computational fluid dynamics. In: 8th International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, Rotterdam, The Netherlands, P25, 2013.

Berg, P., Janiga, G., Gasteiger, R., Beuing, O. and Thévenin, D.: Rupture prediction in intracranial aneurysms – Advanced flow structure detection at known rupture sites. In: 12th Congress of the World Federation of Interventional and Therapeutics Neuroradiology, Buenos Aires, Argentina, Paper 394, 2013.

Berg, P., Janiga, G., Stucht, D., Gasteiger, R., Speck, O. and Thévenin, D.: Can computational fluid dynamics predict the intracranial blood flow in the circle of Willis? A comparison with magnetic resonance imaging. In: 8th International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, Rotterdam, The Netherlands, P24, 2013.

Berg, P., Janiga, G., Stucht, D., Speck, O. and Thévenin, D.: Validation of cerebral blood flow in intracranial aneurysms: CFD versus 7-Tesla PC-MRI. In: ASME Summer Bioengineering Conference, Oregon, USA, SBC2013-14240, poster presentation, 2013.

Berg, P., Stucht, D., Janiga, G., Beuing, O., Speck, O. and Thévenin, D.: CFD versus MRI – Validierung der Hämodynamik in intrakraniellen Aneurysmen. In: 16. IFF-Wissenschaftstage "Digitales Engineering zum Planen, Testen und Betreiben technischer Systeme", (M. Schenk, Ed.), Magdeburg, Germany, 121-129, 2013.

Chittipotula, T., Janiga, G., Abdelsamie, A., Hagemeier, T. and Thévenin, D.: Investigation of bubble dynamics in a rectangular bubble column by using CFD combined with PBM. In: 8th International Conference on Multiphase Flow, Jeju, Korea, 214/1-8, 2013.

Dietzsch, F., Fru, G., Thévenin, D. and Hasse, C.: DNS of turbulent oxy-fuel flames: effects of differential and thermal diffusion. In: 14th International Conference on Numerical Combustion, San Antonio, Texas, 46, 2013.

Dietzsch, F., Fru, G., Thévenin, D. and Hasse, C., The influence of differential diffusion in turbulent oxygen enhanced methane flames, in Direct and Large-Eddy Simulation IX, (Fröhlich, J., Ed.), Dresden, 130-131 (2013).

Fru, G., Thévenin, D. and Markus, D., Direct Numerical Simulations of turbulent H2-air pre-mixtures and analysis towards safety-relevant ignition prediction, in Direct and Large-Eddy Simulation IX, (Fröhlich, J., Ed.), Dresden, 162-163 (2013).

Ghorbani, A., Fru, G., Markus, D., Thévenin, D. and Maas, U.: Application of a PDF method and DNS to ignition processes in transient turbulent jets. In: 14th International Conference on Numerical Combustion, San Antonio, Texas, 46, 2013.

Hagemeier, T., Bordás, R., Meyer, J. and Thévenin, D.: Estimation of contact line velocity of merging and separating droplets. In: 8th International Conference on Multiphase Flow, Jeju, Korea, 360/1-6, 2013.

Hagemeier, T., Bordás, R., Thévenin, D., Glöckner, H. and Tomas, J.: CFD-DPM simulation of multi-stage particle classification in a zigzag apparatus. In: 13th European Symposium on Comminution & Classification ESCC2013, Braunschweig, Germany, 1-4, 2013.

Isaac, B., Parente, A., Smith, P., Fru, G. and Thévenin, D.: Source term parameterization for PCA combustion modelling. In: 6th European Combustion Meeting (ECM 2013), Lund, Sweden, P4-64/1-7, 2013.

Janiga, G., Berg, P., Beuing, O., Skalej, M. and Thévenin, D.: Computational hemodynamics in a patient–specific aneurysm treated with Web-Device. In: 12th Congress of the World Federation of Interventional and Therapeutics Neuroradiology, Buenos Aires, Argentina, Paper 383, 2013.

Janiga, G., Berg, P. and Thévenin, D.: Report on the „Computational Fluid Dynamics Challenge 2013 for rupture-prediction in intracranial aneurysms“. In: 12th Congress of the World Federation of Interventional and Therapeutics Neuroradiology, Buenos Aires, Argentina, Paper 420, 2013.

Meyer, J., Daróczy, L. and Thévenin, D.: Validierung einer mittels CFD optimierten Savonius Turbine im Feldversuch. In: 11. Magdeburger Maschinenbau-Tage, (R. Kasper, Ed.), Otto-von-Guericke-Univ. Magdeburg, 276/1-8, 2013.

Meyer, J., Hagemeier, T., Abdelsamie, A. and Thévenin, D.: CFD modeling of gravity-induced separation for dispersed oil-water emulsions. In: 8th International Conference on Multiphase Flow, Jeju, Korea, 436/1-8, 2013.

Oster, T., Fru, G., Abdelsamie, A. and Thévenin, D.: On-the-fly processing and feature extraction of flame and flow properties obtained by Direct Numerical Simulation. In: 14th International Conference on Numerical Combustion, San Antonio, Texas, 41, 2013.

Roloff, C., Bordás, R., Serowy, S., Thévenin, D. and Skalej, M.: Measurements inside phantom models of cerebral aneurysms using planar PTV. In: 21. Fachtagung Lasermethoden in der Strömungsmesstechnik, Munich, Germany, GALA, ISBN 978-3-9805613-9-6, 49/1-9, 2013.

Shalaby, H., Luo, K.H. and Thévenin, D.: Assessment of multiple acoustic waves effects on turbulent premixed flames. In: 6th European Combustion Meeting (ECM 2013), Lund, Sweden, P4-25/1-5, 2013.

Zähringer, K., Lehwald, A. and Thévenin, D.: Experimentelle Untersuchung der Macro- und Micro-Mischung in geschachtelten statischen Mischern und turbulentem Strömungskanal. In: ProcessNet-Jahrestagung Kristallisation und Mischvorgänge, Magdeburg, Germany, 2013.

Zähringer, K., Pliavaka, K., Pliavaka, F., Gorbatov, S. and Thévenin, D.: Atmospheric generation of excited oxygen for combustion intensification by a RF plasma discharge. In: 6th European Combustion Meeting (ECM 2013), Lund, Sweden, P1-88/1-5, 2013.

Zistl, C., Schießl, R., Fru, G. and Thévenin, D.: The dimension of low dimensional manifolds in state space: a study using DNS data. In: 6th European Combustion Meeting (ECM 2013), Lund, Sweden, P4-88/1-6, 2013.

Theses

Boljahn, D., Untersuchungen des Nachtropfens an Mehrweg-Glasflaschen, Bachelor's Thesis LSS-B02/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Bollin, R.P., Design studies of a flat panel airlift photo bioreactor, Diplomarbeit LSS-D03/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Cimander, P., Untersuchung von Membranmaterialien für eine Segelwindkraftanlage, Bachelor’s Thesis LSS-B01/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Franzke, A., CFD-Analyse des Ein_flusses der Referenzkraftsto_ffde_finition auf das Brennverfahren eines direkteinspritzenden Ottomotors, Master’s Thesis LSS-M01/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Görs, E., Numerische Verbrennungssimulationen laminarer Vormischflammen mit OpenFOAM, Diplomarbeit LSS-D03/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Hahne, F., Analyse von Energieeinsparpotentialen an Motorfunktionsprüfständen, Master’s Thesis LSS-M03/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Hübener, M., Experimentelle Untersuchung einer optimierten Savonius-Turbine, Master’s Thesis LSS-M04/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Jaworski, D., Untersuchung des Einflusses von Fahrdynamik auf das Strömungsverhalten im Kühlmittelkreislauf mittels Simulation in OpenFOAM, Bachelor’s Thesis LSS-B07/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Jenrich, S., Untersuchung der Betriebsbedingungen eines aktiven Tankentlüftungssystems und der dazugehörigen Komponenten, Diplomarbeit LSS-D02/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Kühle, M., Bestimmung der Dicke von Rieselfilmen mittels Fluoreszenzmessung, Studienarbeit LSS-S05/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Leupolt, C., Forecasting of wave conditions for the wave energy test sites Nissum Bredning and Hanstholm, Master’s Thesis LSS-M04/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Litschko, M., Temperaturmessung um einen geheizten Zylinder mittels Rayleigh-Thermometrie, Bachelor’s Thesis LSS-B04/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Napierala, C.F., Algorithmische Optimierung von Rotorblättern, Diplomarbeit LSS-D01/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Rauchegger, C., Experimentelle und theoretische Untersuchungen zur Schwergasfreisetzung und -ausbreitung, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Urbanski, B., Analyse von Open-Source Präprozessor-Programmen für CFD, Studienarbeit LSS-S01/13, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Wagner, L.-M., Erprobung eines Inline-Prozessviskosimeters für Lackprodukte unter Technikumsbedingungen, Bachelor’s Thesis LSS-B07/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Yahyazade, K., Numerical simulation of turbulent flows in nozzle and in rotating configurations using the open-source software OpenFOAM, Master's Thesis LSS-M02/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

Yan, B., Suitability of Tesla pumps for blood flows, Master's Thesis LSS-M01/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2013).

2012

Journal articles

Bordás, R., John, V., Schmeyer, E. and Thévenin, D., Measurement and simulation of a droplet population in a turbulent flow field. Comput. Fluids 66, (2012) 52-62.

Bordás, R., Seshadhri, S., Janiga, G., Skalej, M. and Thévenin, D., Experimental validation of numerical simulations on a cerebral aneurysm phantom model. Interv. Med. Applied Sci. 4(4), (2012) 193-205.

Chittipotula, T., Janiga, G. and Thévenin, D., Optimizing soot prediction models for turbulent non-premixed ethylene/air flames. Chem. Eng. Sci. 70, (2012) 62-76.

Fru, G., Janiga, G. and Thévenin, D., Impact of volume viscosity on the structure of turbulent premixed flames in the Thin Reaction Zone regime. Flow Turbul. Combust. 88, (2012) 451-478.

Gasteiger, R., Lehmann, D.J., van Pelt, R., Janiga, G., Beuing, O., Vilanova, A., Theisel, H. and Preim, B., Automatic detection and visualization of qualitative hemodynamic characteristics in cerebral aneurysms. IEEE Trans. Vis. Comput. Graph. 18(12), (2012) 2178-2187.

Hagemeier, T., Hartmann, M., Kühle, M., Thévenin, D. and Zähringer, K., Experimental characterization of thin films, droplets and rivulets using LED fluorescence. Exp. Fluids 52(2), (2012) 361-374.

Lehwald, A., Janiga, G., Thévenin, D. and Zähringer, K., Simultaneous investigation of macro- and micro-mixing in a static mixer. Chem. Eng. Sci. 79, (2012) 8-18.

Schalau, B., Rauchegger, C., Schmidt, D. and Thévenin, D., Einfluss der Quellhöhe auf die Ausbreitung schwerer Gase. Techn. Sicherheit 2(10), (2012) 35-37.

Tarlet, D., Bendicks, C., Roloff, C., Bordás, R., Wunderlich, B., Michaelis, B. and Thévenin, D., Gas flow measurements by 3D Particle Tracking Velocimetry using coloured tracer particles. Flow Turbul. Combust. 88, (2012) 343-365.

Proceedings and Conferences

Abdelsamie, A., Lee, C. and Thévenin, D.: Two-way interactions in particle-laden isotropic turbulence: physical mechanisms and numerical approaches. In: 13th Workshop on Two-Phase Flow Predictions, (Sommerfeld, M., Ed.), Halle-Merseburg, Germany, 1-10, 2012.

Arányi, P., Janiga, G., Zähringer, K. and Thévenin, D.: Comparison of different POD methods for time-resolved measurements in complex flows. In: Conference on Modelling Fluid Flow (the 15th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-08-4586-1, 369-376, 2012.

Bencs, P., Szabó, S., Bordás, R., Thévenin, D. and Zähringer, K.: Influence of background pattern on the temperature field measured by Background-Oriented Schlieren. In: 15th International Symposium on Flow Visualization, Minsk, Belarus, 91/1-91/10, 2012.

Berg, P., Beuing, O., Janiga, G., Neugebauer, M., Skalej, M. and Thévenin, D.: Characterization of the ruptured site in intracranial aneurysms based on CFD computations. In: Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), Berlin, Germany, ISBN 978-0-9562121-5-3, 339-344, 2012.

Berg, P., Janiga, G. and Thévenin, D.: Detaillierter Vergleich numerischer Flussvorhersagen in zerebralen Aneurysmen unter Verwendung verschiedener CFD Software. In: 15. IFF-Wissenschaftstage "Digitales Engineering zum Planen, Testen und Betreiben technischer Systeme", (M. Schenk, Ed.), Magdeburg, Germany, 320-327, 2012.

Berg, P., Janiga, G. and Thévenin, D.: Detailed comparison of numerical flow predictions in cerebral aneurysms using different CFD software. In: Conference on Modelling Fluid Flow (the 15th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-08-4586-1, 128-135, 2012.

Berg, P., Janiga, G. and Thévenin, D.: CFD Challenge: Solutions using the commercial solver Fluent and the Open Source solver OpenFOAM. In: ASME Summer Bioengineering Conference, Farjado, Puerto Rico, SBC2012-80168, 1-2, 2012.

Bordás, R., Shaw, R. and Thévenin, D.: Comparison of experimentally determined droplet collision rates with theoretical predictions. In: 16th International Conference on Clouds and Precipitation, Leipzig, Germany, 2012.

Fru, G. and Thévenin, D.: Probability of auto-ignition in turbulent hydrogen-air mixtures using DNS. In: 34th International Symposium on Combustion, Warsaw, Poland, 4A01, 2012.

Hagemeier, T., Thévenin, D. and Zähringer, K.: Stereoscopic fluorescence analysis of films, droplets and rivulets. In: 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 282/1-282/8, 2012.

Janiga, G., Beuing, O., Neugebauer, M., Berg, P., Thévenin, D. and Skalej, M.: Oscillatory flow behavior and rupture prediction for intracranial aneurysms. In: IntraCranial Stent Meeting ICS12, Madison, Wisconsin, 2012.

Janiga, G., Stucht, D., Gasteiger, R., Berg, P., Speck, O. and Thévenin, D.: Characterization of intracranial hemodynamics using 7 Tesla 4D PC-MRI measurements and CFD. In: IntraCranial Stent Meeting ICS12, Madison, Wisconsin, 2012.

Janiga, G., Zähringer, K. and Thévenin, D.: Optimal chemical markers of the heat release rate deduced from DNS. In: 34th International Symposium on Combustion, Warsaw, Poland, 4A05, 2012.

Kalmár, L., Janiga, G. and Soltész, L.: CFD investigation of the turbulent flow in a one-stage radial-flow blower aggregate. In: International Conference on Innovative Technologies, IN-TECH 2012, (Car, Z., Kudláček, J. and Pepelnjak, T., Eds.) Rijeka, Croatia, ISBN 978-953-6326-77-8, 599-602, 2012.

Lehwald, A., Jenrich, S., Thévenin, D. and Zähringer, K.: Experimental investigation of macro- and micro-mixing in a reactive turbulent channel flow. In: 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 159/1-159/10, 2012.

Lichtenberg, N. and Thévenin, D.: Modeling of mixing and separation in three-phase flows. In: 7th OpenFOAM Workshop, Darmstadt, Germany, 2012.

Lucius, A., Brenner, G., Lehwald, A. and Thévenin, D.: Investigation of unsteady flows in a centrifugal fan using High-Speed PIV and numerical simulations. In: International Conference on Fan Noise, Technology and Numerical Methods, Senlis, France, 54/1-11, 2012.

Mátrai, Z., Szaszák, N., Roloff, C., Bordás, R., Szabó, S. and Thévenin, D.: Investigation of the velocity field in a full-scale artificial medical model. In: Conference on Modelling Fluid Flow (the 15th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-08-4586-1, 136-143, 2012.

Medeiros de Souza, L., Janiga, G. and Thévenin, D.: Multi-objective parameter optimization of the Realizable k-epsilon turbulence model. In: 9th Int. ERCOFTAC Symposium on Engineering Turbulence Modeling and Measurements (ETMM9), (Geurts B., Ed.) Thessaloniki, Greece, P5/1-P5/6, 2012.

Mohamed, M.H., Janiga, G. and Thévenin, D.: Optimal design of a Savonius turbine. In: Conference on Modelling Fluid Flow (the 15th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-08-4586-1, 55-62, 2012.

Pasternak, M., Mauss, F., Janiga, G. and Thévenin, D.: Self‐calibrating model for Diesel engine simulations in 0D modelling framework. In: Society of Automotive Engineers, Detroit, SAE Paper 2012-01-1072, 1-14, 2012.

Pliavaka, K., Zähringer, K., Pliavaka, F., Riedel, U., Slavinskaya, N., Kuntner, N. and Thévenin, D., Excited oxygen generation by atmospheric radio-frequency plasma discharge for combustion intensification, in Nonequilibrium Processes in Plasma, Combustion, and Atmosphere, (Starik, A.M. and Frolov, S.M., Eds.), Torus Press, Russia, ISBN 978-5-94588-121-1, 118-122 (2012).

Rauchegger, C., Schröder, V., Lohse, V. and Thévenin, D.: Release and dispersion of heavy gases - Experimental results and numerical simulations. In: 8th Global Congress on Process Safety (AIChE/GCPS2011), Houston, Paper 245117, poster presentation, 2012.

Roloff, C., Zähringer, K. and Thévenin, D.: Error quantification of particle position estimation on colour images for Particle Tracking Velocimetry. In: 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 257/1-257/12, 2012.

Szaszák, N., Mátrai, Z., Bordás, R., Szabó, S. and Thévenin, D.: Experimental characterization of a cost-effective semi-active grid for turbulence stimulation. In: Conference on Modelling Fluid Flow (the 15th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-08-4586-1, 362-368, 2012.

Yu, H., Janiga, G. and Thévenin, D.: Automatic optimization of rotary blood pump, considering hemolysis. In: 20th Congress of the International Society for Rotary Blood Pumps, (Kucukaksu, S.D., Ed.), Istanbul, Turkey, 46, 2012.

Theses

Abraham, N., Simulation des Resin Transfer Molding mit OpenFOAM, Studienarbeit LSS-S02/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Beye, M., PTV-Messungen an einem Phantom-Modell eines cerebralen Aneurysma, Bachelor’s Thesis LSS-B05/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Blech, G., Optimierung der Zumischgeometrie für Fett-Mager-Brennkammern mit Hilfe numerischer Strömungsuntersuchungen und Bewertung hinsichtlich des Einsatzes in modernen Fluggasturbinen, Diplomarbeit LSS-D04/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Bollin, R.P., Adaption of cross-correlation in imaging methods of fluid dynamics, Studienarbeit LSS-S02/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Buchtatyj, D., Numerische Berechnungen zur Optimierung einer Mischanlage für Suspensionsbeton, Diplomarbeit LSS-D06/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Busche, J., Parameterbestimmung am monodispersen Tropfengenerator, Bachelor’s Thesis LSS-B09/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Chittipotula, T., Numerical prediction of nanoparticle formation in flames, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Fru, G., Direct Numerical Simulation of turbulent flames on parallel computers, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Hagemeier, T., Experimental and numerical investigation of vehicle soiling processes, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Jenrich, S., Untersuchungen der Macro- und Micromischung in einem Strömungskanal unter laminaren und turbulenten Bedingungen, Studienarbeit LSS-S03/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Kasper, R., Numerische Simulation der Aerodynamik eines Hotelgebäudes, Bachelor's Thesis LSS-B04/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Lehmann, P., Numerische Simulation einer instationären Strömung mit Verdichtungsstößen in Steuerkanälen, Diplomarbeit LSS-D01/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Lenzner, F., Untersuchung des Einflusses von elektronisch angeregtem Sauerstoff auf die Verbrennung in einer vorgemischten Methanflamme, Bachelor’s Thesis LSS-B06/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Oertel, D., Application of optical measurement techniques in a wind tunnel, Bachelor’s Thesis LSS-B03/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Schack, D., Untersuchungen zur Positionsbestimmung fluoreszierender Strömungstracer in der Particle Tracking Velocimetry, Bachelor’s Thesis LSS-B02/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Scholz, S., Vergleich einer Zahnringpumpe mit einer Flügelzellenpumpe, Studienarbeit LSS-S01/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Stroscherer, J., Untersuchung von Einflussgrößen bei der Bestimmung des Krafstoffverbrauchs an Motoren unter realen Bedingungen, Bachelor’s Thesis LSS-B01/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

Wilke, R., Modellbildung und Simulation einer Mikrodampfturbine, Diplomarbeit LSS-D01/12, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2012).

2011

Journal articles

Bendicks, C., Tarlet, D., Roloff, C., Bordás, R., Wunderlich, B., Michaelis, B. and Thévenin, D., Improved 3-D Particle Tracking Velocimetry with coloured particles. J. Signal Inform. Proc. 2, (2011) 59-71.

Bordás, R., Hagemeier, T., Wunderlich, B. and Thévenin, D., Droplet collisions and interaction with the turbulent flow within a two-phase wind tunnel. Phys. Fluids 23, (2011) 085105/1-11.

Chittipotula, T., Janiga, G. and Thévenin, D., Improved soot prediction models for turbulent non-premixed ethylene/air flames. Proc. Combust. Inst. 33, (2011) 559-567.

Fru, G., Janiga, G. and Thévenin, D., Direct Numerical Simulations of the impact of high turbulence intensities and volume viscosity on premixed methane flames. J. Combust. 746719, (2011) 1-12.

Fru, G., Thévenin, D. and Janiga, G., Impact of turbulence intensity and equivalence ratio on the burning rate of premixed methane-air flames. Energies 4(6), (2011) 878-893.

Hagemeier, T., Hartmann, M. and Thévenin, D., Practice of vehicle soiling investigations: a review. Int. J. Multiphase Flow 37, (2011) 860-875.

Kalmbach, A., Bordás, R., Öncül, A.A., Thévenin, D., Genzel, Y. and Reichl, U., Experimental characterization of flow conditions in 2 L and 20 L bioreactors with wave-induced motion. Biotechnol. Prog. 27(2), (2011) 402-409.

Moench, T., Gasteiger, R., Janiga, G., Theisel, H. and Preim, B., Context-aware mesh smoothing for biomedical applications. Comput. Graphics 35, (2011) 755-767.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D., Multi-objective optimization of the airfoil shape of Wells turbine used for wave energy conversion. Energy 36(1), (2011) 438-446.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D., Optimal blade shape of a modified Savonius turbine using an obstacle shielding the returning blade. Energ. Convers. Manage. 52, (2011) 236-242.

Neugebauer, M., Janiga, G., Beuing, O., Skalej, M. and Preim, B., Anatomy-guided multi-level exploration of blood flow in cerebral aneurysms. Computer Graphics Forum 30(3), (2011) 1041-1050.

Seshadhri, S., Janiga, G., Beuing, O., Skalej, M. and Thévenin, D., Impact of stents and flow diverters on hemodynamics in idealized aneurysm models. J. Biomech. Eng. 133(7), (2011) 071005/1-9.

Proceedings and Conferences

Bencs, P., Szabó, S., Bordás, R., Zähringer, K. and Thévenin, D.: Simultaneous measurement of velocity and temperature downstream of a heated cylinder. In: ASME Pressure Vessels & Piping Conference, Baltimore, Maryland, PVP2011-57789, 1-6, 2011.

Bencs, P., Szabó, S., Bordás, R., Zähringer, K. and Thévenin, D.: Synchronization of Particle Image Velocimetry and Background Oriented Schlieren measurement techniques. In: 8th Pacific Symposium on Flow Visualization and Image Processing, (Znamenskaya, I.A., Ed.), Moscow, ISBN 978-5-8279-0092-4, 003/1-003/6, 2011.

Bencs, P., Tóbiás, P., Szabó, S., Bordás, R., Zähringer, K. and Thévenin, D.: Development of a PIV-BOS technique for simultaneous measurement of velocity and temperature field. In: microCAD’11 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-957-2, 7-12, 2011.

Berg, P., Janiga, G. and Thévenin, D.: Instationäre Strömungssimulation und Auswertung von Blutströmungen in zerebralen Aneurysmen mit Stent. In: 10. Jahrestagung der Deutschen Gesellschaft für Computergestützte Chirurgie (CURAC), Magdeburg, Germany, 2011.

Bordás, R., Hagemeier, T. and Thévenin, D.: Experimental quantification of droplet collision rates in turbulent sprays. In: 7th International Symposium on Turbulence and Shear Flow Phenomena, Ottawa, Canada, 4B5P1/4B5P-5, 2011.

Bordás, R., John, V., Schmeyer, E. and Thévenin, D.: Measurement and simulation of a turbulent spray. In: 13th European Turbulence Conference ETC13, Warsaw, Poland, 2011.

Bordás, R., Schmeyer, E., John, V. and Thévenin, D.: Experimental investigation of two-phase flows representing cumulus cloud conditions. In: Multiple Scales in Fluid Dynamics and Meteorology, Berlin, Germany, 2011.

Chittipotula, T., Janiga, G. and Thévenin, D.: Soot radiation models for turbulent nonpremixed ethylene/air flames. In: 5th European Combustion Meeting, Cardiff, U.K., 367, 2011.

Fru, G., Janiga, G. and Thévenin, D.: Probability of successful ignition events in turbulent flows using DNS. In: 13th International Conference on Numerical Combustion, Corfu, Greece, 212, 2011.

Fru, G., Janiga, G. and Thévenin, D., Direct Numerical Simulation of highly turbulent premixed flames burning methane, in Direct and Large-Eddy Simulation VIII, (Kuerten, H., Geurts, B., Armenio, V. and Fröhlich, J., Eds.), Springer, ISBN 978-94-007-2481-5, 327-332 (2011).

Fru, G., Thévenin, D. and Janiga, G.: Direct Numerical Simulations of synthetic gas oxidation under realistic conditions. In: 1st ERCOFTAC Conference on Simulation of Multiphase Flows in Gasification and Combustion, (Hasse, C., Ed.), Dresden, Germany, 68-70, 2011.

Janiga, G., Rössl, C., Seshadhri, S. and Skalej, M.: Overview of the virtual intracranial stenting challenge 2010. In: microCAD’11 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-957-2, 45-50, 2011.

Janiga, G., Rössl, C., Seshadhri, S., Skalej, M. and Thévenin, D.: Influence of stenting on hemodynamics and wall shear stress in a patient-specific geometry. In: 6th International Symposium on Biomechanics in Vascular Biology and Cardiovascular Disease, Rotterdam, The Netherlands, 23, 2011.

Janiga, G., Seshadhri, S., Bordás, R., Skalej, M. and Thévenin, D.: Comparison of computational and experimental results of the pulsatile flow in an aneurysm phantom model. In: 14. IFF-Wissenschaftstage, (M. Schenk, Ed.), Magdeburg, Germany, 71-77, 2011.

Janiga, G. and Truemper, K.: Dimension reduction for laminar methane combustion. In: 3d International Workshop on Model Reduction in Reacting Flows, Corfu, Greece, 300-302, 2011.

Kalmár, L., Janiga, G., Kristóf, G., Fodor, B., Soltész, L. and Varga, Z.: Numerical simulation and analysis of the flow in a one-stage blower. In: microCAD’11 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-957-2, 39-44, 2011.

Neugebauer, M., Janiga, G., Beuing, O., Skalej, M. and Preim, B.: Anatomy-guided multi-level exploration of blood flow in cerebral aneurysms. In: Eurographics / IEEE Symposium on Visualization 2011 (EuroVis 2011), (Hauser, H., Pfister, H. and van Wijk, J.J., Eds.), 30(3), 1041-1050, 2011.

Rauchegger, C., Schalau, B., Schmidt, D., Lohse, V., Schröder, V. and Thévenin, D.: Experimental results from heavy gas dispersions (R134a). In: 7th Global Congress on Process Safety (AIChE/GCPS2011), Chicago, ISBN 978-0-8169-1067-10, 1-13, 2011.

Roloff, C., Bendicks, C., Michaelis, B., Zähringer, K. and Thévenin, D.: Particle Tracking Velocimetry with fluorescent micro-particles. In: microCAD’11 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-957-2, 73-80, 2011.

Roloff, C., Öncül, A., Thévenin, D., Genzel, Y. and Reichl, U.: Simulation der Kultivierung adhärenter Zellen in Wave-Bioreaktoren. In: Tagung "Bioverfahrenstechnik an Grenzflächen", Potsdam, 2011.

Schmeyer, E., Bordás, R., Thévenin, D. and John, V.: On numerical methods for the simulation of two-phase flows with population balance systems. In: Multiple Scales in Fluid Dynamics and Meteorology, Berlin, Germany, 2011.

Yu, H., Janiga, G. and Thévenin, D.: Numerical prediction of hemolysis based on Computational Fluid Dynamics. In: Simulation and Modeling of Biological Flows (SIMBIO), Brussels, Belgium, 31-33, 2011.

Theses

Berg, P., Instationäre Strömungssimulation und Auswertung von Blutströmungen in zerebralen Aneurysmen mit Stent, Diplomarbeit LSS-D03/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Blech, G., Suitability of Tesla pumps for blood flows, Studienarbeit LSS-S05/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Blech, G., Isotherme Strömungsuntersuchung verlustreduzierter Zumischgeometrien für Fett-Mager-Brennkammern von Fluggasturbinen, Studienarbeit LSS-S03/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Bordás, R., Optical measurements in disperse two-phase flows: application to rain formation in cumulus clouds, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Buchtatyj, D., Strömungstechnische Berechnungen an einer Tesla-Turbine, Studienarbeit LSS-S04/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Engel, S., Numerische Simulation der Frischluftzufuhr in containerisierten Blockheizkraftwerken, Bachelor’s Thesis LSS-B03/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Gey, T., Rechnerische Korrektur der optischen Abbildungsverzerrungen bei der PIV, Studienarbeit LSS-S01/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Gövert, S., Analysis of unsteady flow phenomena in gas turbine combustion systems based on Large Eddy Simulations, Diplomarbeit LSS-D05/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Heßenkemper, J., Die Aerodynamik des PKW-Rückspiegels unter Berücksichtigung von Aspekten der Fahrzeugverschmutzung, Bachelor's Thesis LSS-B02/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Janiga, G., Flow optimization using Computational Fluid Dynamics, Habilitation Thesis, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Kapitza, L., Experimentelle Analyse des transienten Verhaltens der einlasskanalgenerierten Zylinderinnenströmung, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Kerst, C., Instationäre Strömungssimulation mittels OpenFOAM in einem statischen Mischer, Bachelor's Thesis LSS-B01/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Kühn, R., Optimierung des Tieftemperatur-Sprühverhaltens einer Waschwasseranlage in der Automobilindustrie, Bachelor's Thesis LSS-B02/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Mohamed, M.H., Design optimization of Savonius and Wells turbines, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Quast, M., Numerical modeling of cerebral blood flows using fluid-structure coupling, Diplomarbeit LSS-D02/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Seshadhri, S., Hemodynamics and virtual stenting of cerebral aneurysms, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

Tercan, K.B., Investigation of macro-mixing and micro-mixing in a static mixer using two-tracer Laser-Induced Fluorescence, Master’s Thesis LSS-M01/11, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2011).

2010

Journal articles

Czapla, F., Kail, N., Öncül, A., Lorenz, H., Briesen, H. and Seidel-Morgenstern, A., Application of a recent FBRM-probe model to quantify preferential crystallization of DL-threonine. Chem. Eng. Res. Des. 88(11), (2010) 1494-1504.

Hentschke, C., Serowy, S., Janiga, G., Rose, G. and Tönnies, K., Estimating blood-flow by re-projection of 2D-DSA to 3D-RA data sets for blood flow simulations. International Journal of Computer Assisted Radiology and Surgery 5(1), (2010) 342-343.

Kapitza, L., Imberdis, O., Bensler, H., Willand, J. and Thévenin, D., An experimental analysis of the turbulent structures generated by the intake port of a DISI-engine. Exp. Fluids 48(2), (2010) 265-280.

Lehwald, A., Thévenin, D. and Zähringer, K., Quantifying macro-mixing and micro-mixing in a static mixer using two-tracer Laser-Induced Fluorescence. Exp. Fluids 48(5), (2010) 823-836.

Medeiros de Souza, L., Janiga, G., John, V. and Thévenin, D., Reconstruction of a distribution from a finite number of moments with an adaptive spline-based algorithm. Chem. Eng. Sci. 65, (2010) 2741–2750.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D., Optimization of Savonius turbines using an obstacle shielding the returning blade. Renew. Energ. 35, (2010) 2618-2626.

Öncül, A., Bordás, R., Thévenin, D., Genzel, Y. and Reichl, U., CFD-Modellierung der Zellkultivierung in Wave-Bioreaktoren. Chem. Ing. Tech. 82(9), (2010) 1512-1513.

Öncül, A.A., Kalmbach, A., Genzel, Y., Reichl, U. and Thévenin, D., Characterization of flow conditions in 2 L and 20 L wave bioreactors® using Computational Fluid Dynamics. Biotechnol. Prog. 26(1), (2010) 101-110.

Shalaby, H. and Thévenin, D., Statistically significant results for the propagation of a turbulent flame kernel using Direct Numerical Simulations. Flow Turbulence Combust. 84(3), (2010) 357-367.

Proceedings and Conferences

Bencs, P., Szabó, S., Bordás, R., Thévenin, D., Zähringer, K. and Wunderlich, B.: Investigation of the velocity (PIV) and temperature field (BOS) of a heated cylinder in a low Re-number flow. In: 14th International Symposium on Flow Visualization, Daegu, Korea, 1-8, 2010.

Bordás, R., Hagemeier, T. and Thévenin, D.: Experimental investigation of droplet-droplet interactions. In: ILASS2010, 23rd Annual Conference on Liquid Atomization and Spray Systems, Brno, Czech Republic, ISBN 978-80-7399-997-1, 198.1-198.6, 2010.

Chittipotula, T., Janiga, G. and Thévenin, D.: Optimizing soot prediction models using CFD combined with DQMOM. In: 4th International Conference on Population Balance Modelling, Berlin, Germany, 413-431, 2010.

Chittipotula, T., Janiga, G. and Thévenin, D.: Modelling TiO2 nanoparticle formation in turbulent flames. In: Euromech Fluid Mechanics Conference EFMC-8, Bad Reichenhall, Germany, MS2-5, 2010.

Fru, G., Janiga, G. and Thévenin, D.: DNS of highly turbulent premixed flames burning methane. In: Direct and Large-Eddy Simulation VIII, Eindhoven, 1-6, 2010.

Fru, G., Janiga, G. and Thévenin, D.: Direct numerical simulation of turbulent methane flames with and without volume viscosity. In: Euromech Fluid Mechanics Conference EFMC-8, Bad Reichenhall, Germany, MS2-9, 2010.

Fru, G., Thévenin, D., Zistl, C., Janiga, G., Gouarin, L. and Laverdant, A., 3D Direct Simulation of a nonpremixed hydrogen flame with detailed models, in Direct and Large-Eddy Simulation VII, (Armenio, V., Geurts, B. and Fröhlich, J., Eds.), Springer, ISBN 978-90-481-3652-0_63, 433-437 (2010).

Hagemeier, T., Hartmann, M. and Thévenin, D.: Improvement of Eulerian model for liquid films. In: 7th International Conference on Multiphase Flow, Tampa, Florida, 1-9, 2010.

Hagemeier, T. and Thévenin, D.: Interaction of droplets and liquid films. In: 12th Workshop on Two-Phase Flow Predictions, (Sommerfeld, M., Ed.), Halle-Merseburg, Germany, 1-11, 2010.

Janiga, G., Rössel, C., Seshadhri, S., Skalej, M. and Thévenin, D.: Presentation of challenge results. In: 4th Virtual Intracranial Stenting Challenge (VISC), Houston, USA, 2010.

Janiga, G., Seshadhri, S., Beuing, O., Neugebauer, M., Gasteiger, R., Preim, B., Rose, G., Skalej, M. and Thévenin, D.: Mesh dependency study of the CFD-modeling in an intracranial aneurysm. In: microCAD’10 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-910-7, 19-26, 2010.

Janiga, G., Seshadhri, S., Beuing, O., Neugebauer, M., Gasteiger, R., Preim, B., Rose, G., Skalej, M. and Thévenin, D.: Virtual stent deployment in real and virtual geometries. In: 13. IFF-Wissenschaftstage, (M. Schenk, Ed.), Magdeburg, Germany, 308-312, 2010.

Janiga, G., Seshadhri, S. and Thévenin, D.: Stent wire shape optimization based on Computational Fluid Dynamics. In: Live Interventional Neuroradiology Conference (LINC), Houston, USA, 2010.

Lehwald, A., Leschka, S., Thévenin, D. and Zähringer, K., Experimental investigation of a static mixer for validation of numerical simulations, in Micro and Macro Mixing, (Bockhorn, H., Mewes, D., Peukert, W., and Warnecke, H.-J., Eds.), Springer, 227-244 (2010).

Lehwald, A., Zähringer, K. and Thévenin, D.: Simultaneous Two-Tracer-Laser-Induced Fluorescence and Particle Image Velocimetry for the investigation of macro- and micro-mixing in a static mixer. In: 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, Paper 1604, 1-11, 2010.

Mátrai, Z., Bordás, R., Janiga, G. and Thévenin, D.: Laser-Doppler-Velocimetry measurements in artifical medical models. In: microCAD’10 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-910-7, 45-50, 2010.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D.: Optimal performance of a modified three-blade Savonius turbine using frontal guiding plates. In: ASME Turbo Expo Conference, Glasgow, Scotland, GT2010-22538, 1-10, 2010.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D.: Airfoil shape optimization of a two-stage Wells turbine. In: microCAD’10 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-910-7, 51-56, 2010.

Mohamed, M.H. and Thévenin, D.: Performance optimization of a Savonius turbine considering different shapes for frontal guiding plates. In: Tenth International Congress of Fluid Dynamics (ICFD10), ASME, Cairo, Egypt, ICFD10-EG-3026, 1-12, 2010.

Öncül, A., Bordás, R., Thévenin, D., Genzel, Y. and Reichl, U.: CFD modeling and validation of cell cultivation in wave bioreactors. In: 28. DECHEMA-Jahrestagung der Biotechnologen, paper 5042, Aachen, Germany, 2010.

Öncül, A., Janiga, G., Genzel, Y., Reichl, U. and Thévenin, D.: Two-population CFD simulation: microcarrier system for adherent cell growth in wave bioreactors. In: 4th International Conference on Population Balance Modelling, Berlin, Germany, 667-681, 2010.

Öncül, A., Thévenin, D., Genzel, Y. and Reichl, U.: Flow characterization and two-population CFD simulation in wave bioreactors. In: 8th European Symposium on Biochemical Engineering Science ESBES-8, Bologna, Italien, poster presentation, 2010.

Rauchegger, C., Schmidt, D., Lohse, V., Negendank, D. and Thévenin, D.: Experimentelle Untersuchungen zur Schwergasausbreitung. In: 10. Fachtagung Anlagen, Arbeits- und Umwelsicherheit, Köthen, Germany, ISBN 978-3-89746-119-2, 1-9, 2010.

Roloff, C., Bendicks, C., Michaelis, B., Tarlet, D., Thévenin, D., Zähringer, K. and Wunderlich, B.: 3D-PTV in gas flows using fluorescent micro-particles. In: 14th International Symposium on Flow Visualization, Daegu, Korea, 1-11, 2010.

Szabó, S. and Thévenin, D.: Experimental and numerical analysis of flow around a heated circular cylinder. In: microCAD’10 International Scientific Conference, (Bikfalvi, P., Ed.), Miskolc, Hungary, ISBN 978-963-661-924-4, 47-54, 2010.

Zähringer, K., Bourig, A. and Thévenin, D.: Flame modifications induced by electronically excited oxygen generated by a cold plasma. In: 6th International Workshop and Exhibition on Plasma Assisted Combustion (IWEPAC), (Matveev, I., Ed.), Heilbronn, Germany, 45-47, 2010.

Theses

Berg, P., Strömungsmechanische Untersuchung von Druckabfällen an Ventilen im Schwingungsdämpfer mit Hilfe des Softwarepakets OpenFOAM, Studienarbeit LSS-S04/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Bogatkin, V., Experimentelle Untersuchung von Tropfen-Tropfen-Wechselwirkungsprozessen, Studienarbeit LSS-S03/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Bogdahn, M., Numerical simulation of the response behaviour of a bi-directional probe including the comparison of the results with experimental data, Bachelor's Thesis LSS-B01/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Bourig, A., Combustion modification by non-thermal plasma, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Glaser, R., Physikalische Charakterisierung mehrstufiger Rührsysteme in der Fermentation zur Etablierung von Scale up / Scale down Modellen, Diplomarbeit LSS-D03/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Hanke, K., Untersuchung einer reaktiven Strömung an einem statischen Mischer vom Typ SMX, Studienarbeit LSS-S02/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Jin, J., Theoretical modelling and numerical methods for computational fluid dynamics of turbulent reacting flows, Master's Thesis LSS-M01/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Kühle, M., Entwicklung einer autonomen Sonde zur Temperaturmessung, Studienarbeit LSS-S01/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Lind, M., Experimental investigation of a modified Savonius turbine, Studienarbeit LSS-S01/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Lind, M., Optimaler Betrieb einer Kondensationsturbine, Diplomarbeit LSS-D01/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Linseisen, B., Direct Numerical Simulation of flames on parallel supercomputers: corrections to the Navier-Stokes equations, Master's Thesis LSS-M03/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Milkevych, V., Optimierung der Messanordnung am LSS-Windkanal, Studienarbeit LSS-S02/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Milkevych, V., Auslegung eines Filters für Emulsion und Öl, Studienarbeit LSS-S03/10, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

Öncül, A., Simulation of interacting populations in inhomogeneous flows using reduced models, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2010).

2009

Journal articles

Baranyi, L., Szabó, S., Bolló, B. and Bordás, R., Analysis of low Reynolds number flow around a heated circular cylinder. J. Mech. Sci. Technol. 23, (2009) 1829-1834.

Bourig, A., Thévenin, D., Martin, J.-P., Janiga, G. and Zähringer, K., Numerical modeling of H2-O2 flames involving electronically-excited species O2(a1Deltag), O(1D) and OH(2Sigma+). Proc. Combust. Inst. 32, (2009) 3171-3180.

Öncül, A.A., Janiga, G. and Thévenin, D., Comparison of various micromixing approaches for Computational Fluid Dynamics simulation of barium sulfate precipitation in tubular reactors. Ind. Eng. Chem. Res. 48, (2009) 999-1007.

Öncül, A.A., Thévenin, D., Kalmbach, A., Genzel, Y. and Reichl, U., Numerische und experimentelle Untersuchung der Fließbedingungen in Wave-Bioreaktoren. Chem. Ing. Tech. 81(8), (2009) 1241.

Seshadhri, S., Janiga, G., Rose, G., Preim, B., Skalej, M. and Thévenin, D., Flow investigation in an exact cerebral artery aneurysm model using Laser Doppler Anemometry. ASAIO Journal 55(2), (2009) 158.

Shalaby, H., Laverdant, A. and Thévenin, D., Direct Numerical Simulation of a realistic acoustic wave interacting with a premixed flame. Proc. Combust. Inst. 32, (2009) 1473-1480.

Shalaby, H., Thévenin, D. and Laverdant, A., Potential of Direct Numerical Simulations to investigate flame/acoustic interactions. Acta Acustica 95, (2009) 428-439.

Zähringer, K., Bourig, A., Martin, J.-P. and Thévenin, D., Combustion enhancement through electronically excited oxygen. VDI Ber. 2056, (2009) 103-108.

Zistl, C., Hilbert, R., Janiga, G. and Thévenin, D., Increasing the efficiency of postprocessing for turbulent reacting flows. Comput. Visual. Sci. 12, (2009) 383-395.

Proceedings and Conferences

Bencs, P., Bordás, R., Zähringer, K., Szabó, S. and Thévenin, D.: Towards the application of a Schlieren measurement technique in a wind-tunnel. In: microCAD’09 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-866-7, 13-20, 2009.

Bendicks, C., Tarlet, D., Michaelis, B., Thévenin, D. and Wunderlich, B.: Use of coloured tracers in gas flow experiments for a Lagrangian flow analysis with increased tracer density. In: 31st DAGM Symposium on Pattern Recognition, (Denzler, J., Notni, G. and Süße, H., Eds.), Springer, 392-401, 2009.

Bordás, R., Hanke, K., Bencs, P. and Thévenin, D.: 2D-PIV measurements in a two-phase wind-tunnel normal to the main flow. In: microCAD’09 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-866-7, 39-46, 2009.

Bordás, R. and Thévenin, D.: Modeling cumulus clouds in a two-phase wind tunnel. In: European Geosciences Union General Assembly EGU, Vienna, Austria, 2009.

Chittipotula, T., Janiga, G. and Thévenin, D.: Numerical prediction of soot emissions in ethylene flames. In: Workshop on Multiphase Flows: Simulation, Experiment and Application, Forschungszentrum Rossendorf, Germany, 2009.

Chittipotula, T., Janiga, G. and Thévenin, D.: Numerical prediction of soot emissions in ethylene flames based on DQMOM. In: 13th ETH Conference on Combustion Generated Nanoparticles, ETH, Zurich, Switzerland, poster presentation, 2009.

Janiga, G.: Load balance issues of a detailed chemistry computation on HPC machines. In: microCAD’09 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-866-7, 123-130, 2009.

Janiga, G., Beuing, O., Seshadhri, S., Neugebauer, M., Gasteiger, R., Preim, B., Rose, G., Skalej, M. and Thévenin, D.: Virtual stenting using real patient data. In: Conference on Modelling Fluid Flow (the 14th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-420-987-4, 111-117, 2009.

Janiga, G. and Thévenin, D.: Three-dimensional detailed simulation of laminar burners on parallel computers. In: 4th European Combustion Meeting ECM2009, Vienna, Austria, 810175/1-810175/7, 2009.

Kalmár, L., Janiga, G. and Czibere, T.: Numerical computation of the flow in the boundary layer around a circular cylinder. In: microCAD’09 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-866-7, 131-138, 2009.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D.: Optimal performance of a Savonius turbine using a guiding-box. In: Conference on Modelling Fluid Flow (the 14th International Conference on Fluid Flow Technologies), (Vad, J., Ed.), Budapest, Hungary, ISBN 978-963-420-987-4, 871-878, 2009.

Öncül, A., Thévenin, D., Kalmbach, A., Genzel, Y. and Reichl, U.: Numerical and experimental investigation of flow conditions in wave bioreactors. In: 27. DECHEMA-Jahrestagung der Biotechnologen, paper 7739, Mannheim, Germany, 2009.

Öncül, A.A., Genzel, Y., Reichl, U. and Thévenin, D.: Investigation of oxygen transfer process in wave bioreactors using Computational Fluid Dynamics. In: 5th International Workshop on Transport Phenomena with Moving Boundaries, (Schindler, F.-P., Ed.), Berlin, Germany, 2009.

Öncül, A.A., Genzel, Y., Reichl, U. and Thévenin, D.: Flow characterization in wave bioreactors using Computational Fluid Dynamics. In: 21st Meeting of the European Society for Animal Cell Technology, Dublin, Ireland, Paper P187, 2009.

Pap, E., Janiga, G. and Bordás, R.: Möglichkeiten zur rechnerischen Korrektur der optischen Abbildungsverzerrungen bei PIV. In: microCAD’09 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-866-7, 77-86, 2009.

Seshadhri, S., Janiga, G., Rose, G., Preim, B., Skalej, M. and Thévenin, D.: Investigations of steady and unsteady flows in an aortic aneurysm. In: 1st International Conference on Mathematical and Computational Biomedical Engineering CMBE, (Nithiarasu, P., Löhner, R., and van Loon, R. Eds.), Swansea, UK, 246-249, 2009.

Seshadhri, S., Janiga, G., Rose, G., Preim, B., Skalej, M. and Thévenin, D.: Hemodynamic effects in virtual aneurysm model with stenting. In: 1st International Conference on Mathematical and Computational Biomedical Engineering CMBE, (Nithiarasu, P., Löhner, R., and van Loon, R. Eds.), Swansea, UK, 171-174, 2009.

Tarlet, D., Bendicks, C., Bordás, R., Wunderlich, B., Thévenin, D. and Michaelis, B.: Mesures par "Particle Tracking Velocimetry" (3-D PTV) gazeuse avec traceurs multicolores. In: 13ème Congrès Français de Visualisation et de Traitement d’Images en Mécanique des Fluides, (Polidori, G. and Smigielski, P., Eds.), Reims, France, ISBN 978-2-918241-01-0, 1-8, 2009.

Fru, G., Shalaby, H., Laverdant, A., Zistl, C., Janiga, G. and Thévenin, D., Direct Numerical Simulations of turbulent flames to analyze flame/acoustic interactions, in Combustion noise, (Schwarz, A. and Janicka, J., Eds.), Fluid Mechanics and its Applications, Springer, 239-269 (2009).

Shalaby, H., Janiga, G. and Thévenin, D., Direct Numerical Simulation of flame/acoustic interactions, in High Performance Computing in Science and Engineering, (Wagner, S., Steinmetz, M., Bode, A. and Brehm, M., Eds.), Springer, ISBN 978-3-540-69181-5, 377-385 (2009).

Tarlet, D., Bendicks, C., Bordás, R., Wunderlich, B., Thévenin, D. and Michaelis, B., Coloured tracer particles employed for 3-D Particle Tracking Velocimetry (PTV) in gas flows, in Imaging measurement methods for flow analysis, (Nitsche, W. and Dobriloff, C., Eds.), Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol. 106, Springer, 93-102 (2009).

Tarlet, D., Bendicks, C., Bordás, R., Wunderlich, B., Thévenin, D. and Michaelis, B., 3-D Particle Tracking Velocimetry (PTV) in gas flows using coloured tracer particles, in Advances in Turbulence XII, (Eckhardt, B., Ed.), Springer Proceedings in Physics 132, 43-46 (2009).

Thévenin, D., Imberdis, O., Hartmann, M., Bensler, H. and Kapitza, L., Flow fluctuations generated by the intake port of a DISI engine, in Diesel- und Benzindirekteinspritzung, (Tschöke, H., Ed.), Expert Verlag, ISBN 978-3-8169-2867-6, 347-356 (2009).

Theses

Imberdis, O., Turbulent flow structures induced by an engine intake port, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2009).

Kraul, A., Experimentelle Untersuchungen zur Kalibrierung bidirektionaler Sonden, Bachelor's Thesis LSS-B01/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2009).

Krause, N., Untersuchung der Laufradströmung einer Kreiselpumpe mit Hilfe der zeitaufgelösten Particle-Image Velocimetry, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2009).

Yu, H., Numerical investigation of a rotating system using OpenFOAM, Master's Thesis LSS-M02/09, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2009).

2008

Books

Thévenin, D. and Janiga, G., Optimization and Computational Fluid Dynamics, Springer, (2008).

Journal articles

Janiga, G., Shalaby, H. and Thévenin, D., Direct Numerical Simulation of flame/acoustic interactions. inSIDE 6(1), (2008) 18-21.

Öncül, A., Niemann, B., Sundmacher, K. and Thévenin, D., CFD modelling of BaSO4 precipitation inside microemulsion droplets in a semi-batch reactor. Chem. Eng. J. 138, (2008) 498-509.

Seshadhri, S., Janiga, G., Preim, B., Rose, G., Skalej, M. and Thévenin, D., Simulation stationärer und gepulster Strömungen in Aortenaneurysmen. Chem. Ing. Tech. 9, (2008) 1287-1288.

Proceedings and Conferences

Bolló, B., Baranyi, L., Bordás, R., Tolvaj, B., Bencs, P., Daróczy, L. and Szabó, S.: Numerical and experimental investigation of momentum and heat transfer from a heated circular cylinder. In: microCAD’08 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-816-2, 1-8, 2008.

Bordás, R., Bendicks, C., Kuhn, R., Wunderlich, B., Thévenin, D. and Michaelis, B.: Coloured tracer particles employed for 3D-PTV in gas flows. In: 13th International Symposium on Flow Visualization, (Prenel, J.P. and Bailly, Y., Eds.), Nice, France, 093/1-093/12, 2008.

Fru, G., Gouarin, L., Laverdant, A., Thévenin, D., Zistl, C. and Janiga, G.: Three-dimensional Direct Simulation of a nonpremixed hydrogen/air flame using detailed models. In: 32nd International Symposium on Combustion, Montréal, Canada, The Combustion Institute, poster presentation, 2008.

Fru, G., Thévenin, D., Zistl, C., Janiga, G., Gouarin, L. and Laverdant, A.: Three-dimensional Direct Simulation of a nonpremixed hydrogen flame with detailed chemistry. In: Direct and Large-Eddy Simulation 7, Trieste, Italy, 235-236, 2008.

Fru, G., Zistl, C., Janiga, G. and Thévenin, D.: Direct Numerical Simulation of methane flames using tabulated chemistry. In: DNS and LES of Reacting Flows, Maastricht, The Netherlands, poster session, 65-66, 2008.

Hagemeier, T., Bordás, R., Bencs, P., Wunderlich, B. and Thévenin, D.: Determination of droplet size and velocity distributions in a two-phase wind tunnel. In: 13th International Symposium on Flow Visualization, (Prenel, J.P. and Bailly, Y., Eds.), Nice, France, 094/1-094/10, 2008.

Hagemeier, T., Bordás, R. and Janiga, G.: Numerical modeling of aerodynamics around a half cylinder. In: microCAD’08 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-816-2, 9-14, 2008.

Imberdis, O., Hartmann, M., Bensler, H. and Thévenin, D.: Visualisation and quantification of the turbulence structures induced by a gasoline DI port. In: LES4ICE, IFP, Rueil-Malmaison, France, 3/1-3/4, 2008.

Janiga, G.: Optimal configuration of a tube bank heat exchanger. In: microCAD’08 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-816-2, 15-20, 2008.

Kalmár, L., Czibere, T. and Janiga, G.: Investigation of the model parameters of a stochastic two-equation turbulence model. In: microCAD’08 International Scientific Conference, (Lehoczky, L., and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-816-2, 27-36, 2008.

Kapitza, L., Imberdis, O., Bensler, H.P., Willand, J. and Thévenin, D.: Rekonstruktion und Visualisierung der instationären, einlasskanalgenerierten Zylinderinnenströmung an einem Volkswagen 1.6L FSI Zylinderkopf. In: Simulation and Visualization (SimVis) 2008, Magdeburg, Germany, 1-12, 2008.

Lehwald, A., Leschka, S., Zähringer, K. and Thévenin, D.: Fluid dynamics and mixing behavior of a static mixer using simultaneously Particle Image Velocimetry and Planar Laser-Induced Fluorescence measurements. In: 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 1-9, 2008.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D.: Optimal shape of a modified Wells turbine considering mutual interaction between the blades. In: First International Conference of Energy Engineering ICEE-1, Aswan, Egypt, 2008.

Mohamed, M.H., Janiga, G., Pap, E. and Thévenin, D.: Optimal performance of a Savonius turbine using an obstacle shielding the returning blade. In: 9th Int. Congress of Fluid Dynamics and Propulsion ASME-ICFDP9, Alexandria, Egypt, 249/1-249/9, 2008.

Mohamed, M.H., Janiga, G. and Thévenin, D.: Performance optimization of a modified Wells turbine using non-symmetric airfoil blades. In: ASME Turbo Expo Conference, Berlin, Germany, GT2008-50815, 1-8, 2008.

Neugebauer, M., Janiga, G., Zachow, S., Skalej, M. and Preim, B.: Generierung qualitativ hochwertiger Modelle für die Simulation von Blutfluss in zerebralen Aneurysmen. In: Simulation and Visualization (SimVis) 2008, Magdeburg, Germany, 1-15, 2008.

Öncül, A., Thévenin, D., Genzel, Y. and Reichl, U.: Characterization of flow conditions in wave bioreactors using CFD. In: 7th European Symposium on Biochemical Engineering Science ESBES-7, Faro, Portugal, 2008.

Öncül, A., Thévenin, D., Kalmbach, A., Genzel, Y. and Reichl, U.: Flow characterization in wave bioreactors. In: European BioPerspectives, Hanover, Germany, poster presentation, 2008.

Pliavaka, K., Bourig, A., Zähringer, K., Thévenin, D., Martin, J.-P., Lago, V., Barbosa, E., Pliavaka, F., Gorbatov, S., Shushkou, S., and Prihodzka, E.: Effect of singlet oxygen produced by cross discharge on methane combustion. In: Third International Workshop on Nonequilibrium Processes in Combustion and Plasma Based Technologies, Minks, Belarus, ISBN 978-985-6456-61-2, 186-189, 2008.

Seshadhri, S., Janiga, G., Bordás, R., Preim, B., Rose, G., Skalej, M. and Thévenin, D.: Internal flow dynamics of aneurysms: validation of numerical simulations and impact of stent. In: EUROMECH Fluid Mechanics Conference EFMC7, Manchester, U.K., 302, 2008.

Seshadhri, S., Janiga, G., Preim, B., Rose, G., Skalej, M. and Thévenin, D.: Simulation of steady and pulsatile flows in an aortic aneurysm. In: ProcessNet-Jahrestagung 2008, Karlsruhe, 2008.

Shalaby, H. and Thévenin, D.: Three-dimensional Direct Numerical Simulation of flame/acoustic interactions. In: DNS and LES of Reacting Flows, Maastricht, The Netherlands, 9-10, 2008.

Shalaby, H. and Thévenin, D.: Three-dimensional Direct Numerical Simulations of flame/acoustic interactions. In: Int. Conf. on Jets, Wakes and Separated Flows ICJWSF-2008, Berlin, Germany, 1-8, 2008.

Thévenin, D.: Direkte numerische Simulation von Verbrennungsvorgängen und Übergang zur Großwirbelsimulation. In: Grundlagen und moderne Anwendungen der Verbrennungstechnik, Universität Erlangen, invited presentation, 2008.

Wömpner, H.-V., Thévenin, D. and Manhart, M.: Drag reduction using fibers and semi-rigid polymers. In: European Drag Reduction and Flow Control Meeting EDRFCM08, Ostritz, Germany, 1-2, 2008.

Theses

Ayyagari, R.V., Contribution to the development of a new Particle-Tracking-Velocimetry (PTV) method, Master's Thesis LSS-M03/08, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2008).

Medeiros de Souza, L.G., Reconstruction of a distribution from a finite number of its moments, Master's Thesis LSS-M02/08, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2008).

Pounraj, N., Investigation of gas flow by means of tracer-based measuring techniques, Master's Thesis LSS-M01/08, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2008).

Schulze, M., Vorbereitungen zur Untersuchung des "Rotating Stall", Studienarbeit LSS-S01/08, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2008).

2007

Journal articles

Bourig, A., Lago, V., Martin, J.-P., Pliavaka, K., Pliavaka, F., Gorbatov, S., Chernukho, A. and Naumov, V., Generation of singlet oxygen in HV pulsed + DC crossed discharge at atmospheric pressure for oxygen-enhanced combustion. Int. J. Plasma Environ. Sci. Technol. 1(1), (2007) 57-63.

Janiga, G. and Thévenin, D., Reducing the CO emissions in a laminar burner using different numerical optimisation methods. J. Power Energy 221(A), (2007) 647-655.

John, V., Angelov, I., Öncül, A. and Thévenin, D., Techniques for the reconstruction of a distribution from a finite number of its moments. Chem. Eng. Sci. 62, (2007) 2890-2904.

Kurt, T., Öncül, A., El-Rabii, H. and Thévenin, D., Soot formation in non-premixed lifted flames predicted with moment-based methods. VDI Ber. 1988, (2007) 325-330.

Laverdant, A., Gouarin, L. and Thévenin, D., Interaction of a gaussian acoustic wave with a turbulent non-premixed flame. Combust. Theory Modelling 11(4), (2007) 585-602.

Leschka, S., Thévenin, D., Zähringer, K. and Lehwald, A., Fluid dynamics and mixing behavior of a SMX-type static mixer. J. Visual. 10(4), (2007) 342.

Öncül, A. and Thévenin, D., Einfluss der Partikelmorphologie auf die numerische Modellierung der BaSO4-Fällung. Chem. Ing. Tech. 79(9), (2007) 1460.

Shalaby, H., Janiga, G., Laverdant, A. and Thévenin, D., Turbulent flame visualization using Direct Numerical Simulation. J. Visual. 10(2), (2007) 187-195.

Proceedings and Conferences

Bölke, T., Seshadhri, S., Gürvit, Ö., Bade, R., Preim, B., Janiga, G., Skalej, M., Serowy, S. and Rose, G.: Phantom based flow analysis by means of dynamic angiography, CFD and Laser-Doppler-Velocimetry. In: Nuclear Science Symposium Conference, IEEE, Honolulu, Hawai, ISBN 978-1-4244-0923-5, 3440-3445, 2007.

Bordás, R., Fellegi, G., Wunderlich, B., Kuhn, R., Thévenin, D. and Michaelis, B.: Appropriate tracers to measure velocities in particle-laden gas flows using optical techniques. In: International Conference on Multiphase Flow, (Sommerfeld, M., Ed.), Leipzig, Germany, B66/1-B66/7, 2007.

Bordás, R. and Janiga, G.: Numerical simulation of flow instabilities in an axial-flow compressor. In: microCAD’07 International Scientific Conference, (Lehoczky, L. and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-746-2, 21-28, 2007.

Bourig, A., Martin, J.-P., Lago, V., Thévenin, D. and Zähringer, K.: Modelling of the production of excited oxygen molecules in a crossed discharge. In: 18th International Symposium on Plasma Chemistry, Kyoto, Japan, 534/1-534/4, 2007.

Bourig, A., Martin, J.-P., Lago, V., Thévenin, D. and Zähringer, K.: Plasma-enhanced combustion: application of a non-self-sustained nanosecond pulsed discharge to a counter-flow diffusion flame. In: 3d European Combustion Meeting ECM2007, Chania, Greece, 1816/1-1816/6, 2007.

Bourig, A., Martin, J.-P., Lago, V., Thévenin, D., Zähringer, K., Pliavaka, F. and Gorbatov, S.: Plasma generation of excited oxygen for combustion enhancement. In: 18th International Symposium on Plasma Chemistry, Kyoto, Japan, 539/1-539/4, 2007.

Bourig, A., Martin, J.-P., Lago, V., Thévenin, D., Zähringer, K., Pliavaka, K.V., Pliavaka, F.V. and Gorbatov, S.V.: Plasma generation of excited oxygen and combustion enhancement. In: Aerospace Thematic Workshop: Flow and Combustion Control by Plasmas, Varenna, Italy, poster session, 2007.

Imberdis, O., Hartmann, M., Bensler, H., Kapitza, L. and Thévenin, D.: A numerical and experimental investigation of a DISI-engine intake port generated turbulent flow. In: Society of Automotive Engineers, SAE Paper 07FFL-47, 1-15, 2007.

Janiga, G.: Optimization of the model parameters of the Spalart-Allmaras turbulence model. In: microCAD’07 International Scientific Conference, (Lehoczky, L. and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-746-2, 73-80, 2007.

Janiga, G., Gicquel, O. and Thévenin, D.: High-resolution simulation of three-dimensional laminar burners using tabulated chemistry on parallel computers. In: 2nd ECCOMAS Conference on Computational Combustion, (Roekaerts, P., Coelho, P., Boersma, B.J., Claramunt, K., Eds.), Delft, Netherlands, ISBN 978-90-811768-1-1, 0302-023/1-15, 2007.

Janiga, G., Seshadhri, S., Bordás, R., Bade, R., Preim, B., Bölke, T., Gürvit, Ö., Skalej, M. and Thévenin, D.: Experimental validation of CFD results in the model of an artificial aortic aneurysm. In: ANSYS Conference, Dresden, Germany, 2.2.8, 2007.

Janiga, G. and Thévenin, D.: Flow simulations in aneurysm. In: Arbeitskreis Medizinische Visualisierung, Magdeburg, Germany, March, invited presentation, 2007.

Kalmár, L., Janiga, G. and Szabó, S.: Optimization of iso-thermal flows in gas-exhausting  pipe-line systems. In: microCAD’07 International Scientific Conference, (Lehoczky, L. and Kalmár, L., Eds.), Miskolc, Hungary, ISBN 978-963-661-746-2, 81-93, 2007.

Kalmár, L., Janiga, G., Szabó, S. and Snyman, A.: Optimization of the geometrical characteristics of gas-exhausting pipe-line systems. In: 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, Korea, May, 329-338, 2007.

Krause, N., Pap, E. and Thévenin, D.: Influence of the blade geometry on flow instabilities in a radial pump elucidated by Time-Resolved Particle Image Velocimetry. In: ASME Turbo Expo 2007: Power for Land, Sea and Air, GT2007-27455, Montréal, Canada, 1-10, 2007.

Kuhn, R., Bordás, R., Wunderlich, B., Michaelis, B. and Thévenin, D.: Colour class identification of tracers using artificial neural networks. In: 10th International Conference on Engineering Applications of Neural Networks, Thessaloniki, Greece, 13/2/1-13/2/8, 2007.

Leschka, S., Zähringer, K. and Thévenin, D.: Flow and mixing characterization of a static mixer using Laser-Doppler Anemometry and simultaneous Particle-Image-Velocimetry/
Planar Laser-Induced Fluorescence. In: XXIst North American Mixing Forum NAMF'07, Park City, Utah, 2007.

Öncül, A., El-Rabii, H. and Thévenin, D.: Prediction of soot formation in non-premixed flames using DQMOM. In: International Conference on Multiphase Flow, (Sommerfeld, M., Ed.), Leipzig, Germany, B67/1-B67/7, 2007.

Öncül, A., Kurt, T. and Thévenin, D.: Simulation of barium sulphate precipitation in a tubular reactor including micromixing effects. In: International Conference on Multiphase Flow, (Sommerfeld, M., Ed.), Leipzig, Germany, A31/1-A31/8, 2007.

Öncül, A. and Thévenin, D.: Influence of hydrodynamic conditions on particle size distribution. In: European Congress of Chemical Engineering ECCE-6, Copenhagen, Denmark, poster session, 2007.

Öncül, A. and Thévenin, D.: Einfluss der Partikelmorphologie auf die numerische Modellierung der BaSO4-Fällung. In: ProcessNet-Jahrestagung 2007, Aachen, Germany, 10.03, 2007.

Pliavaka, K., Bourig, A., Lago, V., Martin, J.-P., Pliavaka, F., Gorbatov, S. and Chernukho, A.: Development of a HV pulsed power supply and of a crossed discharge reactor for excited O2 generation. In: Aerospace Thematic Workshop: Flow and Combustion Control by Plasmas, Varenna, Italy, poster session, 2007.

Rivera, O., Janiga, G. and Thévenin, D.: Towards the prediction of acoustic emissions relying on Large-Eddy Simulations of turbulent premixed flames. In: Combustion Noise Workshop, (Schröder, W. and Campos, L., Eds.), Lisbon, Portugal, 2007.

Shalaby, H., Laverdant, A. and Thévenin, D.: Amplification and damping of an acoustic wave by a flame, investigated by Direct Numerical Simulations. In: Combustion Noise Workshop, (Schröder, W. and Campos, L., Eds.), Lisbon, Portugal, 2007.

Thévenin, D., Leschka, S. and Zähringer, K.: Investigation of liquid-liquid mixing and reactions in a static mixer. In: 4th International Berlin Workshop on Transport Phenomena with Moving Boundaries, (Schindler, F.-P., Ed.), VDI Series 3 Number 883, ISBN 978-3-18-388303-5, 278-289, 2007.

Wunderlich, B.: Time resolved PIV in rotierenden Strömungskanälen. In: 4. PIV/LIF User Meeting, invited presentation, Dantec Dynamics, Cologne, Germany, 2007.

Wunderlich, B., Bordás, R., Santhosh, S., Bölke, T., Thévenin, D. and Skalej, M.: LDA-Messungen in Blutgefäßen mittels Brechungsindexanpassung. In: Lasermethoden in der Strömungsmesstechnik, (Leder, A., Brede, M., Hüttmann, F., Ruck, B. and Dopheide, D., Eds.), Rostock, Germany, GALA, 47/1-47/7, 2007.

Wunderlich, B., Bordás, R., Thévenin, D., Michaelis, B. and Kuhn, R.: Suitable tracer particles for optical velocity measurements in gas flows. In: 8th International Conference on Optical Particle Characterization, Graz, Austria, poster session, 2007.

Theses

Hagemeier, T., Experimentelle Simulationsmodelle für komplexe Strömungen auf Basis der Ähnlichkeitstheorie, Diplomarbeit LSS-D02/07, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2007).

Künast, M., Aufnahme der Kennlinien und Untersuchung der Zuströmungs- und Abströmungsbedingungen radialer Laufräder unterschiedlicher Bauart, Studienarbeit LSS-S01/07, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2007).

Kurt, T., Numerische Simulation der Russbildung in turbulenten Diffusionsflammen, Diplomarbeit LSS-D01/07, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2007).

Müller, M., Versuchstechnische Untersuchung des Einflusses der Saugleitungsgeometrie auf die Strömung in der Saugleitung, Diplomarbeit LSS-D03/07, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2007).

Shalaby, H., On the potential of large eddy simulation to simulate cyclone separators, Ph.D. Thesis, Fakultät für Maschinenbau, Techn. Univ. Chemnitz, (2007).

2006

Journal articles

Fernandez Fernandez, A., Brichard, B., Berghmans, F., El-Rabii, H., Fokine, F. and Popov, M., Chemical composition fiber gratings in a high mixed gamma neutron radiation field. IEEE Trans. Nucl. Sci. 53(3), (2006) 1607-1613.

Hilbert, R., Janiga, G., Baron, R. and Thévenin, D., Multi-objective shape optimization of a heat exchanger using parallel genetic algorithms. Int. J. Heat Mass Trans. 49(15-16), (2006) 2567-2577.

Krause, N., Pap, E. and Thévenin, D., One circular arc blade impeller of a radial pump measured with TR-PIV. WSEAS Trans. Fluid Mech. 1(5), (2006) 392-398.

Öncül, A., Sundmacher, K., Seidel-Morgenstern, A. and Thévenin, D., Numerical and analytical investigation of barium sulphate crystallization. Chem. Eng. Sci. 61, (2006) 652-664.

Shalaby, H. and Thévenin, D., Influence of the direction of propagation for an acoustic wave interacting with a turbulent premixed flame. Proc. Appl. Math. Mech. 6, (2006) 545-546.

Proceedings and Conferences

Bolló, B., Janiga, G. and Szabó, S.: Modelling of units of an electrically heated furnace. In: microCAD’06 International Scientific Conference, Section E, 16-17 March 2006, Miskolc, Hungary, ISBN 963 661 705 8, 1-6, 2006.

Bordás, R., Hagemeier, T., Thévenin, D. and Wunderlich, B.: LDV-Signale beinhalten mehr Informationen als nur die Geschwindigkeit. In: Lasermethoden in der Strömungsmesstechnik, (Dopheide, D., Müller, H., Strunck, V., Ruck, B. and Leder, A., Eds.), Braunschweig, Germany, GALA , ISBN 3-9805613-3-X, 23/1-23/7, 2006.

Bordás, R., Kuhn, R., Michaelis, B., Thévenin, D. and Wunderlich, B.: Towards the investigation of vortex structures in gas flows with 3D-highspeed Particle Tracking using coloured tracers. In: 12th International Symposium on Flow Visualization, (Kompenhans, G. and Schröder, A., Eds), Göttingen, Germany, ISBN 0-9533991-8-4, 251/1-251/9, 2006.

Bordás, R., Öncül, A., Zähringer, K. and Thévenin, D.: Optical measurements in two-phase flows involving particles. In: 12th International Symposium on Flow Visualization, (Kompenhans, G. and Schröder, A., Eds), Göttingen, Germany, ISBN 0-9533991-8-4, 025/1-025/10, 2006.

Bourig, A., Lago, V., Martin, J.-P., Pliavaka, K., Pliavaka, F., Gorbatov, S., Chernukho, A. and Naumov, V.: Generation of singlet oxygen in HV pulsed + DC cross discharge and pulsed dielectric barrier discharge at atmospheric and reduced pressure for oxygen-enhanced combustion. In: 31st International Symposium on Combustion, Heidelberg, Germany, The Combustion Institute, poster session, 41, 2006.

Bourig, A., Lago, V., Martin, J.-P., Pliavaka, K., Pliavaka, F., Gorbatov, S., Chernukho, A. and Naumov, V.: Generation of singlet oxygen in HV pulsed + DC crossed discharge at atmospheric pressure for oxygen-enhanced combustion. In: 5th ISNTPT, Oléron, France, G17/1-6, 2006.

Bourig, A., Martin, J.-P., Lago, V., Thévenin, D. and Zähringer, K.: Hydrogen combustion in presence of excited oxygen produced by non thermal plasma: Experimental and numerical study. In: International Conference on Nonequilibrium Processes in Combustion and Plasma Based Technologies, Minsk, Belarus, 51-55, 2006.

Czibere, T., Kalmár, L. and Janiga, G.: Fully-developed isothermal and incompressible turbulent flows in passages. In: Conference on Modelling Fluid Flow (the 13th International Conference on Fluid Flow Technologies), (Lajos, T. and Vad, J., Eds.), Budapest, Hungary, ISBN 963-420-872-X, 456-463, 2006.

Fodor, B., Czibere, T., Kalmár, L. and Pap, E.: Näherungsberechnung der betrieblichen Schaufelbelastung von Káplan-Turbinen. In: microCAD’06 International Scientific Conference, Section E, 16-17 March 2006, Miskolc, Hungary, ISBN 963 661 705 8, 13-20, 2006.

Imberdis, O., Bensler, H., Hartmann, M., Hentschel, W., Ohmstede, G. and Thévenin, D.: Visualization and characterization of intake-port model induced turbulent structures. In: 12th International Symposium on Flow Visualization, (Kompenhans, G. and Schröder, A., Eds), Göttingen, Germany, ISBN 0-9533991-8-4, 93/1-93/11, 2006.

Imberdis, O., Bensler, H., Hartmann, M., Hentschel, W., Schrottke, U. and Thévenin, D.: Analysis of turbulent flow induced by a simplified steady-state engine port-model: LDA measurements and CFD simulation. In: Lasermethoden in der Strömungsmesstechnik, (Dopheide, D., Müller, H., Strunck, V., Ruck, B. and Leder, A., Eds.), Braunschweig, Germany, GALA , ISBN 3-9805613-3-X, 15/1-15/9, 2006.

Janiga, G., Gordner, A., Shalaby, H. and Thévenin, D.: Simulation of laminar burners using detailed chemistry on parallel computers. In: ECCOMAS CFD, (Wesseling, P., Oñate, E. and Périaux, J., Eds), Egmond aan Zee, The Netherlands, ISBN 90-9020970-0, 210/1-210/14, 2006.

Janiga, G., Hilbert, R., Baron, R. and Thévenin, D.: Multi-objective shape optimization with Fluent using parallel genetic algorithms. In: Fluent Forum, Bad Nauheim, Germany, 2006.

Janiga, G. and Thévenin, D.: Numerical optimisation of a laminar burner to reduce CO emissions. In: Conference on Modelling Fluid Flow (the 13th International Conference on Fluid Flow Technologies), (Lajos, T. and Vad, J., Eds.), Budapest, Hungary, ISBN 963-420-872-X, 109-115, 2006.

Janiga, G. and Thévenin, D., Direct Numerical Simulation of turbulent reacting flows involving dilute particles, in Direct and Large-Eddy Simulation VI, (Lamballais, E., Friedrich, R., Geurts, B.J. and Métais, O., Eds.), Springer, 101-108 (2006).

Kalmár, L., Czibere, T. and Janiga, G.: Computation of the fully-developed turbulent channel flows. In: microCAD’06 International Scientific Conference, Section E, 16-17 March 2006, Miskolc, Hungary, ISBN 963 661 705 8, 79-84, 2006.

Krause, N., Pap, E. and Thévenin, D.: Investigation of off-design conditions in a radial pump by using time-resolved PIV. In: 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 37-6/1-37-6/11, 2006.

Krause, N., Pap, E. and Thévenin, D.: Influence of blade geometry on the rotating stall in a radial pump impeller. In: Conference on Modelling Fluid Flow (the 13th International Conference on Fluid Flow Technologies), (Lajos, T. and Vad, J., Eds.), Budapest, Hungary, ISBN 963-420-872-X, 1080-1087, 2006.

Leschka, S., Thévenin, D. and Zähringer, K.: Flow measurements around a static mixer using Laser-Doppler Anemometry, Particle Image Velocimetry and Laser-Induced Fluorescence. In: 12th International Symposium on Flow Visualization, (Kompenhans, G. and Schröder, A., Eds), Göttingen, Germany, ISBN 0-9533991-8-4, 87/1-87/10, 2006.

Leschka, S., Thévenin, D. and Zähringer, K.: Fluid velocity measurements around a static mixer using Laser-Doppler Anemometry and Particle-Image Velocimetry. In: Conference on Modelling Fluid Flow (the 13th International Conference on Fluid Flow Technologies), (Lajos, T. and Vad, J., Eds.), Budapest, Hungary, ISBN 963-420-872-X, 639-646, 2006.

Öncül, A., Niemann, B., Sundmacher, K. and Thévenin, D.: CFD model of a semi-batch reactor for the precipitation of nanoparticles in the droplets of a microemulsion. In: 16th International Symposium on Computer-Aided Process Engineering ESCAPE16, Garmisch-Partenkirchen, Germany, (Marquardt, W. and Pantelides, C., Eds.), Elsevier, ISBN 0-444-52257-3, 203-208, 2006.

Öncül, A., Thévenin, D. and Sundmacher, K.: Numerical simulation of BaSO4 precipitation in a coaxial pipe mixer with micromixing effects. In: AIChE Annual Meeting, San Francisco, USA, ISBN 0-8169-1012-X, 70c, 2006.

Phong Bui, T., Schröder, W., Meinke, M., Shalaby, H. and Thévenin, D.: Source term evaluation of the APE-RF system using DNS data. In: ECCOMAS CFD, (Wesseling, P., Oñate, E. and Périaux, J., Eds), Egmond aan Zee, The Netherlands, ISBN 90-9020970-0, 188/1-188/14, 2006.

Pliavaka, K.F., Gorbatov, S., Shushkou, S.V., Pliavaka, F.V., Chernukho, A., Zhdanok, S.A., Naumov, V., Starik, A.M., Bourig, A. and Martin, J.-P.: Singlet oxygen production in electrical non-self-sustained HV pulsed + DC cross-discharge at atmospheric pressure with application to plasma-assisted and combustion technologies. In: International Conference on Nonequilibrium Processes in Combustion and Plasma Based Technologies, Minsk, Belarus, 186-191, 2006.

Shalaby, H., Janiga, G., Laverdant, A. and Thévenin, D.: Visualization of turbulent flames using Direct Numerical Simulation. In: 12th International Symposium on Flow Visualization, (Kompenhans, G. and Schröder, A., Eds), Göttingen, Germany, ISBN 0-9533991-8-4, 141/1-141/9, 2006.

Shalaby, H. and Thévenin, D.: Influence of the direction of propagation for an acoustic wave interacting with a turbulent premixed flame. In: GAMM Annual Meeting 2006, Section 9, (Mehrmann, V. and Paschereit, O.C., Eds.), Berlin, Germany, 2006.

Shalaby, H. and Thévenin, D.: Comparing Reynolds- and Favre-averaging using direct numerical simulations of turbulent flames. In: 31st International Symposium on Combustion, Heidelberg, Germany, The Combustion Institute, poster session, 324, 2006.

Shalaby, H. and Thévenin, D.: Interest of Direct Numerical Simulations for investigations of turbulent flame structure and noise emissions. In: 8th International Congress of Fluid Dynamics & Propulsion (ASME), Sharm El-sheikh, Egypt, 180/1-180/7, 2006.

Shalaby, H., Thévenin, D., Phong Bui, T., Schröder, W. and Meinke, M.: DNS/CAA analysis of the sound field radiated from a turbulent premixed flame. In: 13th International Congress on Sound and Vibration, (Eberhardsteiner, J., Mang, H.A. & Waubke, H., Eds.), Vienna, Austria, ISBN 3-95-01554-5-7, 164/1-164/8, 2006.

Thévenin, D.: Direkte numerische Simulation von Verbrennungsvorgängen. In: Grundlagen und moderne Anwendungen der Verbrennungstechnik, Universität Erlangen, invited presentation, 2006.

Thévenin, D.: Modelling internal reacting flows. In: Conference on Modelling Fluid Flow (the 13th International Conference on Fluid Flow Technologies), Invited presentation, (Lajos, T. and Vad, J., Eds.), Budapest, Hungary, ISBN 963-420-872-X, 12-25, 2006.

Witte, K., Wunderlich, B., Betzler, N., Thévenin, D., Bórdas, R. and Edelmann-Nusser, J., Examination of a swimming dummy's flow field by using Laser Doppler Velocimetry, in The Engineering of Sport 6: Developments for Disciplines, (Moritz, E. and Haake, S., Eds.), Springer New York, 75-80 (2006).

Wunderlich, B., Hagemeier, T., Thévenin, D. and Bordás, R.: LDV signals provide more information than used before. In: Conference on Modelling Fluid Flow (the 13th International Conference on Fluid Flow Technologies), (Lajos, T. and Vad, J., Eds.), Budapest, Hungary, ISBN 963-420-872-X, 730-735, 2006.

Theses

Hagemeier, T., Bestimmung der Größe von Einzeltropfen mittels Laser-Doppler-Anemometrie, Studienarbeit LSS-S02/06, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2006).

Kurt, T., Simulation der Kristallbildung in komplexen inhomogenen Strömungen, Studienarbeit LSS-S03/06, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2006).

Lucius, A., Bewertung und Vergleich von detaillierten berührungslosen Messergebnissen mit numerischen Vorhersagen für einen schadstoffarmen Fluggasturbinenbrenner, Diplomarbeit LSS-D01/06, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2006).

Müller, M., Theoretische und numerische Untersuchung der Strömungsverhältnisse im Zuströmbereich des rotierenden Pumpenlaufrades, Studienarbeit LSS-S01/06, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2006).

Parmar, R.D., Acoustics and thermoacoustics: transfer matrix approach, characterization of premixed laminar flame, Master's Thesis LSS-M02/06, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2006).

Seshadhri, S., Improvement and investigation of a cardiac valve tester, Master's Thesis LSS-M01/06, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke" and Charité Berlin, (2006).

2005

Journal articles

El-Rabii, H., Gaborel, G., Lapios, J.P., Thévenin, D., Rolon, J.C. and Martin, J.-P., Laser spark ignition of two-phase monodisperse mixtures. Optics Com. 256(4-6), (2005) 495-506.

El-Rabii, H., Zähringer, K., Rolon, J.-C. and Lacas, F., Laser ignition in an LPP injector. VDI Ber. 1888, (2005) 325-331.

Fayoux, A., Zähringer, K., Gicquel, O. and Rolon, J.-C., Experimental and numerical determination of heat release in counterflow premixed laminar flames. Proc. Combust. Inst. 30, (2005) 251-257.

Krause, N., Zähringer, K. and Pap, E., Time-resolved particle imaging velocimetry for the investigation of rotating stall in a radial pump. Exp. Fluids 39(2), (2005) 192-201.

Laverdant, A. and Thévenin, D., Direct numerical simulation of a gaussian acoustic wave interaction with a turbulent premixed flame. C. R. Acad. Sc. 333, (2005) 29-37.

Lemaire, A., Zähringer, K., Meyer, T.R. and Rolon, J.-C., Unsteady effects on flame extinction limits during gaseous and two-phase flame/vortex interactions. Proc. Combust. Inst. 30, (2005) 475-483.

Öncül, A., Elsner, M.P., Thévenin, D. and Seidel-Morgenstern, A., Numerische Untersuchung der Kristallisation zur Enantiomerentrennung in komplexen Strömungen. Chem. Ing. Tech. 8, (2005) 1040-1041.

Öncül, A., Sundmacher, K. and Thévenin, D., Numerical investigation of the influence of the activity coefficient on barium sulphate crystallization. Chem. Eng. Sci. 60, (2005) 5395-5405.

Shalaby, H., Hilbert, R., Laverdant, A. and Thévenin, D., Direct Numerical Simulation of turbulent reacting flows using accurate physical models. ERCOFTAC Bul. 64, (2005) 35-38.

Thévenin, D., Three-dimensional direct simulations and structure of expanding turbulent methane flames. Proc. Combust. Inst. 30, (2005) 629-637.

Proceedings and Conferences

Bordás, R., Meinecke, D. and Wunderlich, B.: LDV signals provide more information about bubble flow than used before. In: Workshop on Multiphase Flows: Simulation, Experiment and Application, Forschungszentrum Rossendorf, Germany, 1-2, 2005.

Janiga, G. and Benke, M.: Numerical simulation of a gas burner. In: microCAD 2005 International Scientific Conference, Section F: Fluid and Heat Engineering, 10-11 March 2005, Miskolc, Hungary, ISBN 963 661 646 9, 53-59, 2005.

Janiga, G. and Thévenin, D.: Coupling CFD/optimization for flows involving heat transfer and chemical reactions. In: COMREF 05, Computational Methods for Multidimensional Flows, Heidelberg, Germany, invited presentation, 2005.

Janiga, G. and Thévenin, D.: Coupling optimization methods with Computational Fluid Dynamics. In: 25th Workshop of the "Arbeitskreis Strömungsmaschinen", Berlin, Germany, invited presentation, 2005.

John, V., Angelov, I., Öncül, A., Sundmacher, K. and Thévenin, D.: Towards the optimal reconstruction of a distribution from its moments. In: AIChE Annual Meeting, Cincinnati, 1-13, 2005.

Kalmár, L., Pap, E. and Krause, N.: Comparison of the measured and calculated head-discharge characteristic curves of the radial flow pump In: microCAD 2005 International Science Conference, Section F: Fluid and Heat Engineering, 10-11 March 2005, Miskolc, Hungary, ISBN 963 661 646 9, 61-69, 2005.

Krause, N., Zähringer, K. and Pap, E.: Investigation of rotating stall in a radial pump by time-resolved particle imaging velocimetry. In: 5th International Conference of PhD students, Engineering Sciences I, 14-20 August 2005, Miskolc, Hungary, ISBN 963 661 673 6, 111-116, 2005.

Öncül, A., Elsner, M., Thévenin, D. and Seidel-Morgenstern, A.: Numerical analysis of the preferential crystallization of enantiomers in complex flows. In: 12th International Workshop on Industrial Crystallization BIWIC2005, (Jones, M. J. and Ulrich, J., Eds.), Halle, Germany, ISBN 3-86010-797-6, 165-172, 2005.

Öncül, A., Elsner, M.P., Thévenin, D. and Seidel-Morgenstern, A.: Numerische Untersuchung der Kristallisation zur Enantiomerentrennung in komplexen Strömungen. In: GVC-DECHEMA-Jahrestagungen, paper 1140, Wiesbaden, Germany, 2005.

Öncül, A., Thévenin, D., Elsner, M. and Seidel-Morgenstern, A.: Numerical analysis of the preferential crystallization of enantiomers. In: 11th Workshop on Two-Phase Flow Predictions, (Sommerfeld, M., Ed.), Halle-Merseburg, Germany, ISBN 3-86010-767-4, 5.10/1-5.10/15, 2005.

Pap, E., Krause, N. and Zähringer, K.: Unsteady flow phenomena investigated in radial impeller using time resolved PIV. In: microCAD 2005 International Science Conference, Section F: Fluid and Heat Engineering, 10-11 March 2005, Miskolc, Hungary, ISBN 963 661 646 9, 91-99, 2005.

Shalaby, H., Laverdant, A. and Thévenin, D.: Interaction of an acoustic wave with a turbulent premixed syngas flame. In: 12th International Congress on Sound and Vibration, (Bento Coehlo, J. L. and Alarcao, D., Eds.), Lisbon, Portugal, 635/1-635/8, 2005.

Shalaby, H., Thévenin, D. and Laverdant, A.: Using DNS to investigate flame/acoustic interaction. In: Euromech Colloquium 467 on Turbulent Flow and Noise Generation, (Juvé, D. and Munz, C.-D., Eds.), Marseille, France, 100-103, 2005.

Thévenin, D., Hilbert, R., Shalaby, H. and Janiga, G.: Initial flame propagation in a turbulent flow. In: ECCOMAS Thematic Conference on Computational Combustion, (Coehlo, P.J., Semiao, V. and Toste de Azevedo, J.L., Eds.), Lisbon, Portugal, 25/1-25/20, 2005.

Thévenin, D., Shalaby, H. and Janiga, G.: Accurate DNS of reacting flows: impact of boundary conditions and of physical models. In: First Workshop on Quality Assessment of Unsteady Methods for Turbulent Combustion Prediction and Validation, Seeheim, Germany, 2.4/1-2.4/4, 2005.

Thévenin, D., Zähringer, K. and Janiga, G.: Automatic optimization of two-dimensional burners. In: European Combustion Meeting ECM05, Louvain, Belgium, 240/1-240/6, 2005.

Theses

Lucius, A., Prestudy SPEED (Solid Particle Enhanced Erosion Diagnostics), Studienarbeit LSS-S01/05, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2005).

2004

Journal articles

de Persis, S., Teyssandier, F., Thévenin, D. and Darabiha, N., Classical and dynamical analysis of gas phase reactivity: influence of carbon precursor in the CVD of SiC. J. Electrochem. Soc. 151(4), (2004) 236-244.

El-Rabii, H., Zähringer, K., Rolon, J.-C. and Lacas, F., Laser ignition in a lean premixed prevaporized injector. Combust. Sci. Tech. 176, (2004) 1391-1417.

Hilbert, R., Tap, F., El-Rabii, H. and Thévenin, D., Impact of detailed chemistry and transport models on turbulent combustion simulations. Prog. Energy Combust. Sci. 30, (2004) 61-117.

Hilbert, R. and Thévenin, D., Influence of differential diffusion on maximum flame temperature in turbulent non-premixed hydrogen/air flames. Combust. Flame 138, (2004) 175-187.

Lemaire, A., Meyer, T.R., Zähringer, K., Gord, J.R. and Rolon, J.-C., PIV/PLIF-Investigation of two-phase vortex-flame interactions : effects of vortex size and strength. Exp. Fluids 36(1), (2004) 36-42.

Tap, F., Hilbert, R., Thévenin, D. and Veynante, D., A generalized flame surface density modelling approach for the auto-ignition of a turbulent non-premixed system. Combust. Theory Modelling 8, (2004) 165-196.

Proceedings and Conferences

Hilbert, R. and Thévenin, D., Direct numerical simulation of turbulent non-premixed flames: influence of transport model, in Direct and Large-Eddy Simulation V, (Friedrich, R., Geurts, B.J. and Metais, O., Eds.), Kluwer Academic Publishers, 359-366 (2004).

Janiga, G., Franke, J. and Frank, W.: Numerical simulation of the turbulent flow in a pipe with an expanding sphere. In: microCAD 2004 International Science Conference, Section D: Fluid and Heat Engineering, 18-19 March 2004, Miskolc, Hungary, 49-56, 2004.

Krause, N., Zähringer, K. and Pap, E.: Time-resolved particle imaging velocimetry for the investigation of rotating stall in a radial pump. In: 12th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 10/4, 2004.

Thévenin, D.: Three-dimensional computations of laminar flames using detailed models for chemistry and transport. In: 10th International Conference on Numerical Combustion, Sedona, Arizona, 43, 2004.

Thévenin, D.: Structure of turbulent flames revealed by Direct Numerical Simulations. In: Second International Workshop on Trends in Numerical and Physical Modelling for Turbulent Processes in Gas Turbine Combustors, Heidelberg, 149-158, 2004.

Thévenin, D.: Impact of detailed models for chemistry and transport on DNS of combustion. In: COCCFEA Conference on DNS of Combustion, Imperial College, London, invited presentation, 2004.

Thévenin, D., Simulation of three-dimensional turbulent flames, in Direct and Large-Eddy Simulation V, (Friedrich, R., Geurts, B.J. and Metais, O., Eds.), Kluwer Academic Publishers, 335-342 (2004).

Theses

Henschel, A., Bildung einer Typenfamilie von Radialventilatoren, Diplomarbeit LSS-D02/04, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2004).

Lehwald, A., Messkonzeption zur stationären Messung der Geschwindigkeitsverteilung in Otto-Motoren-Katalysatoren, Diplomarbeit LSS-D01/04, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2004).

2003

Journal articles

Fiorina, B., Baron, R., Gicquel, O., Thévenin, D., Carpentier, S. and Darabiha, N., Modelling non-adiabatic partially premixed flames using flame-prolongation of ILDM. Combust. Theory Modelling 7, (2003) 449-470.

Hilbert, R., Tap, F., Veynante, D. and Thévenin, D., A new modeling approach for the autoignition of a nonpremixed turbulent flame using DNS. Proc. Combust. Inst. 29, (2003) 2079-2085.

Laverdant, A. and Thévenin, D., Interaction of a gaussian acoustic wave with a turbulent premixed flame. Combust. Flame 134(1-2), (2003) 11-19.

Lemaire, A., Meyer, T.R., Zähringer, K., Rolon, J.-C. and Gord, J.R., Vortex-induced flame extinction in two-phase counterflow diffusion flames with CH PLIF and PIV. Applied Opt. 42(12), (2003) 2063-2071.

Thévenin, D., Gicquel, O., de Charentenay, J., Hilbert, R. and Veynante, D., Two- versus three-dimensional direct simulations of turbulent methane flame kernels using realistic chemistry. Proc. Combust. Inst. 29, (2003) 2031-2039.

Thévenin, D. and Hilbert, R., Drei-dimensionale Berechnung von Haushaltsbrennern anhand detaillierter Reaktionsmechanismen. VDI Ber. 1750, (2003) 615-616.

Zähringer, K., Durox, D. and Lacas, F., Helmholtz behavior and transfer function of an industrial fuel swirl burner used in heating systems. International Journal of Heat and Mass Transfer 46, (2003) 3539-3548.

Zähringer, K., Lemaire, A., Meyer, T.R., Gord, J.R. and Rolon, J.-C., Experimentelle Untersuchung von Zweiphasen-Flammen-Wirbel Wechselwirkungen. VDI Ber. 1750, (2003) 413-418.

Proceedings and Conferences

Baron, R., Paxion, S., Gicquel, O., Simous, N., Bastian, P. and Thévenin, D., Development of a 3D parallel multigrid solver for fast and accurate laminar steady flame computations, in Numerical Flow Simulation III, (E.H. Hirschel, Ed.), Notes on Numerical Fluid Mechanics 82, Springer-Verlag, 115-128 (2003).

de Charentenay, J., Thévenin, D. and Hilbert, R.: Analysis of the stabilization processes of detached non-premixed jet flames. In: European Combustion Meeting, Orleans, France, 132/1-132/6, 2003.

El-Rabii, H., Thévenin, D. and Rolon, J.C.: Time-resolved planar laser-induced fluorescence of laser ignition of a methane/air mixture. In: AIAA 34th Plasmadynamics and Lasers Conference, Orlando, Florida, AIAA 2003-3476, 2003.

Hilbert, R. and Thévenin, D.: Influence of transport model on hydrogen/air turbulent non-premixed flames. In: European Combustion Meeting, Orleans, France, 161/1-161/6, 2003.

Kalmár, L. and Pap, E.: Experimental and theoretical investigations of the flow in different radial-flow pump impellers. In: Conference on Modelling Fluid Flow (the 12th International Conference on Fluid Flow Technologies), Budapest, Hungary, 1016-1023, 2003.

Kalmár, L. and Pap, E.: Approximate numerical calculation of viscous flow in radial-flow impeller. In: microCAD, Miskolc, Hungary, 45-51, 2003.

Krause, N., Zähringer, K. and Pap, E.: Rotating stall investigated in a rotating radial pump impeller using time resolved PIV. In: Conference on Modelling Fluid Flow (the 12th International Conference on Fluid Flow Technologies), Budapest, Hungary, 101-107, 2003.

Lemaire, A., Zähringer, K., Meyer, T.R., Gord, J.R. and Rolon, J.-C.: Vortex-induced extinction of non-premixed counterflow flames. In: European Combustion Meeting, Orléans, France, 140/1-140/6, 2003.

Lemaire, A., Zähringer, K., Meyer, T.R., Gord, J.R. and Rolon, J.-C.: Experimental study of two-phase vortex-flame interactions by laser induced fluorescence of OH and CH. In: PSFVIP-4, Chamonix, France, 2003.

Meyer, T.R., Katta, V.R., Brown, M.S., Gord, J.R., Roquemore, W.M., Lemaire, A., Zähringer, K. and Rolon, J.-C.: Dynamics of vortex-flame interactions and implications for turbulent combustion. In: 39th AIAA/ASME/SAE/ASEE joint Propulsion Conference & Exhibit, Huntsville, USA, 2003.

Pap, E., Krause, N. and Zähringer, K.: Untersuchung der rotierenden Abreißströmung in einem rotierenden radialen Pumpenlaufrad mittels zeitaufgelöster PIV. In: 11. Fachtagung Lasermethoden in der Strömungsmeßtechnik, Braunschweig, Germany, 54.1-54.7, 2003.

Rolon, J.-C., Thévenin, D., Zähringer, K., Lemaire, A., Gord, J.R., Meyer, T.R. and Katta, V.R.: Simultaneous CH PLIF and PIV for the investigation of two-phase vortex-flame interactions. In: Direct Numerical Simulations and Analytical Experiments for Constructing Detailed Turbulent-Combustion Model, Anraku-cho, Toba-shi, Mie, Japan, invited presentation, 2003.

Schuller, T., Zähringer, K. and Candel, S.: Modelisation and experimental validation of the acoustic behaviour of a commercial heating system. In: Third European Conference on Small Burner and Heating Technology, Aachen, Germany, 2003.

Suda, J.M., Wunderlich, B., Kiss, I. and Pap, E.: On the Laser Doppler Velocimetry measurements and numerical simulation of particle flow in a model electrostatic precipitator. In: Conference on Modelling Fluid Flow (the 12th International Conference on Fluid Flow Technologies), Budapest, Hungary, 728-733, 2003.

Szabó, S., Janiga, G., Pap, E., Wunderlich, B. and Szabó, Á.: Comparing computed and measured results in curved channel flow. In: Conference on Modelling Fluid Flow (the 12th International Conference on Fluid Flow Technologies), Budapest, Hungary, 676-683, 2003.

Tap, F., Hasse, C., Hilbert, R., Veynante, D. and Peters, N.: Comparison of the RIF model with laminar DNS data of an igniting H2/Air System. In: European Combustion Meeting, Orleans, France, 200/1-200/6, 2003.

Tran, B.N., Zähringer, K., Rolon, J.-C., Martin, J.-P. and Naumov, V.: LIF diagnostics of CH radicals in atmospheric premixed methane-air flames. In: International Symposium Combustion and Atmospheric pollution, St. Petersburg, Russia, 2003.

Zähringer, K., Pap, E. and Krause, N.: Time resolved PIV as a tool for the examination of flow instabilities in rotating centrifugal turbomachinery. In: Conference on Modelling Fluid Flow (the 12th International Conference on Fluid Flow Technologies), Budapest, Hungary, 94-100, 2003.

Thévenin, D., Direct simulations of three-dimensional turbulent premixed flames, in Computational Fluid and Solid Mechanics, K.J. Bathe (Ed.), Elsevier, 1544-1547 (2003).

Theses

Borosi, G., Die Drallströmung in Wirbelkammern, Ph.D. Thesis, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Fakultät für Verfahrens- und Systemtechnik, Univ. of Magdeburg "Otto von Guericke", (2003).

Henschel, A., Untersuchung der strömungstechnischen Arbeitsbereiche der Laufradtypen für Radial-Hochdruckventilatoren unter Berücksichtigung der Größenstufung, der Drehzahlmöglichkeit und des Wirkungsgrades, Studienarbeit LSS-S01/03, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2003).

Krause, N., Untersuchung der Strömung im rotierenden Laufrad einer Radialpumpe mittels Particle Image Velocimetry, Diplomarbeit LSS-D01/03, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2003).

Schumann, J., Modellierung eines neuen Stufenblendenanordnung zur Dämpfung der Druckstöße in Ventilspritzpumpen, Diplomarbeit LSS-D02/03, Lehrstuhl für Strömungsmechanik und Strömungstechnik, Univ. of Magdeburg "Otto von Guericke", (2003).

 

Letzte Änderung: 01.12.2017 - Ansprechpartner: Prof. Dr.-Ing. habil. Dominique Thévenin